User's Manual

Setting up the WiFi connection between your WiFi router/AP and eStarling frame
I. After you powered up your eStarling frame at Step1: above, you will see the eStarling
logo and the frame will start to search for the WiFi network.
II. For the first time setup of your eStarling frame, the following message may show up (this
step may takes as long as 2min.)
III. Run the NETCONFIG utility downloaded from Step3 above. Choose “Scan for available
WiFi network and setup manually” if you are running the NETCONFIG utility from a
desktop or laptop PC which have WiFi enabled.
(Re. : it is NOT recommended to use the “Full manual setup” mode unless you know all
the details about your WiFi network)
IV. The PC will scan for available WiFi network. Highlight your WiFi network and click “Next”.