USER GUIDE PH-BT2020 PORTABLE BLUETOOTH SPEAKER
WELCOME Thank you for purchasing the PH-BT2020 and welcome to the Photive family! This product is designed to provide you with portable wireless high quality sound for your iPad, iPhone, iPod, computer or other Bluetooth audio devices. This instruction booklet explains the basic operations, specifications and care of the unit. Please read them carefully and keep for future reference.
TABLE OF CONTENTS PACKAGE 4 SAFETY INFORMATION 12 FUNCTIONS 5 FCC INFORMATION 14 CHARGING 6 WARRANTY INFORMATION 14 PAIRING 7 HANDS-FREE SPEAKERPHONE 8 LINE-IN 9 OPERATION INSTRUCTION 10 TROUBLESHOOTING 11 SPECIFICATION 12
PACKAGE 1 2 3 1 USB cable 2 3.
FUNCTIONS Previous/Vol Play/Pause MIC MIC Answer/Redial phone calls/Pair Next/Vol + OFF/ON OFF ON AUX AUX micro USB charging port PH-BT2020 Input: 5V 1A Made in China 5
CHARGING Before using your PH-BT2020, please charge it using the micro USB charging cable included in the package. Please note: Most USB chargers are compatible with PH-BT2020. For optimal AC charging, please use a 1.0A USB charger. Plug the small micro USB pin into the charging port on the back of the speaker, and the other end of the cable (the standard USB 2.0 plug) into any standard USB port (such as a computer or USB charger). The LED light on the back will turn red when it is being charged.
PAIRING 1 Turn your speaker on. 2 The Bluetooth LED indicator will flash blue. 3 Enable your Bluetooth device such as cell phones, tablets or other Bluetooth media and make sure it is in searching mode. 4 Select “PH-BT2020” in the list shown in the Bluetooth device. Note 1 If your Bluetooth device version is below V2.0, please enter password “0000” for a connection. 2 The speaker will automatically reconnect to the last connected Bluetooth enabled audio device.
HANDS-FREE SPEAKERPHONE 1 You can use PH-BT2020 as a portable speakerphone for incoming calls when connected wirelessly and outgoing calls via Bluetooth. 2 Take your call by pressing the “ “. Press once again when ending the call. Music will resume automatically. 3 To make a call, simply dial your cell phone and talk to the speaker. Once your call is connected, choose PH-BT2020 in the headset options.
LINE-IN 1 If your device is not Bluetooth enabled you can still enjoy your music simply by using the LineIn Audio Jack. Connect the speaker with the audio cable that is included in the package to any device with a 3.5mm standard audio jack. Once connected the speaker can be used as a wired speaker. 2 The default volume is at maximum level. To control the volume level, please use your device to control the volume.
OPERATION INSTRUCTION VOLUME ADJUSTMENT At any time during a phone call, or while playing music, the volume can be changed with the ” ” or “ “ button. To raise the volume press and hold the “ “ button for 3 seconds. To lower he volume press and hold the “ “ button for 3 seconds. There will be a tone from the speaker to indicate that the level has reached maximum or minimum volume. Please note: This function will only work properly when connected in Bluetooth mode.
TROUBLESHOOTING No power Ensure the speaker is charged and with enough power for operation. The speaker can be used when it is in charging mode. No sound Ensure the speaker is on. Ensure your Bluetooth device is on. If the volume of the speaker is too low, adjust the volume to an appropriate level. Unable to connect Press the pairing button until the LED indicator flashes quickly. The Bluetooth speaker will go into pairing mode. Select PH-BT2020 on your Bluetooth enable device.
SPECIFICATION SAFETY INFORMATION Speaker parameters WARNING Output power 3W x 2 Impedence 4Ω Frequency response 90 hz - 18khz Sensitive 80dB+/- 2dB S/N 70dB Bluetooth parameters Effective distance 33ft./10m Version 3.0+EDR Work environment Temperature -4ºf-140ºf (-20ºc/+60ºc) NOTES Do not expose the built-in battery to excessive heat, including direct sunlight and fire. In addition, do not expose it to rain, moisture and any kinds of liquid.
Battery/Charger Hazard CAUTION • Do not dispose of your PH-BT2020 in a fire. The battery could explode causing injury or death. • Only charge the battery in accordance with the user instructions supplied with the PH-BT2020. • Do not attempt to disassemble the PH-BT2020 charger or force open the built-in battery because this may result in electric shock. • Do not charge the PH-BT2020 in damp areas or in extremely high or low temperatures because this could result in electric shock.
FCC INFORMATION WARRANTY INFORMATION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed or used in accordance with the instructions, it may cause harmful interference to radio communications.
For warranty & support, Please email support@photive.
© 2014 Photive Edsion, NJ 08837 iPad, iPhone and iPod are trademarks of Apple Inc., in the U.S. and/or other countries. The Bluetooth word mark and logos are owned by Bluetooth SIG, Inc. All other trademarks and trade names are those of their respective owners. The illustrated product and specifications may differ slightly from those supplied.
