Bluetooth Speaker / BARREL USER MANUAL
This product is guaranteed for 2 years against defects in manufacturing or assembly. This guarantee only applies to the primary purchase by the end user. It does not cover issues related to improper handling by the user. Proof of purchase is required in order to render the warranty valid. The warranty does not cover problems associated with improper use, whether it is a result of negligence, processing, failure to store properly (excessive heat or humidity), improper installation or unauthorized repairs.
The device should always be readily accessible. The device should not be exposed to dripping or splashing water. No objects filled with liquids such as vases shall be placed on the device. Always leave a minimum distance of 10 cm around the unit to ensure sufficient ventilation. Open flame sources, such as candles, should not be placed on top of the device. The device is intended for use only in a temperate climate.
2402-2480MHz
Product Size: 85x85x65mm Product Weight:80g Package Contents Speaker BARREL User Manual USB to Micro-USB Cable 3.5mm Audio Cable 3. Charging the Speaker Before using the speaker for the first time charge it for at least 24 hours. Plug the micro-USB cable into the port of the speaker. Plug the opposite USB end into the USB port of a computer or compatible AC wall adapter. The red LED turns on to indicate that the unit is charging. Once fully charged, the red LED turns off.
Speaker button functions LED Red/Blue Power On/Off Micro USB Use a computer USB port/AC power adapter with USB When the battery is low, approximately 1.5-2 hours of charging time is necessary to recharge the battery. 3.5mm audio input (line-in) The European directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream.
Please visit www.alteclansing.com MARKET MAKER BRAND LICENSING 79/81 Ancienne Route Nationale 7 69570 DARDILLY FRANCE HELPLINE 0811 482 202 Product features, specifications and appearances are subject to change without notice. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
©2017 AL Infinity, LLC. All rights reserved. ALTEC LANSING, HORN Design and related logos are registered trademarks of AL Infinity and used under license.
