ChilliP-A5-Manual-2020-Download

5.h To Remove the Grate

Take care when doing this as the new grate is heavy and it is possible to trap your

ﬁngers. Wear gloves if possible and do not rush the job.

Please see our online video at:

www.chillipenguin.co.uk/faqs/looking-after-your-penguin/vermiculite-ﬁre-bricks/

STEP 1

Remove the ash pan, place one hand inside and push the grate upwards, lifting the

grate into the diagonal position (left to right, not front to back).

STEP 2

Reach into the ﬁre chamber with your other hand to receive the grate, support the

grate on the stove while you ﬁnd a comfortable 2 handed hold.

STEP 3

Tilt the grate onto an angle which will allow it to exit the door.

STEP 4

Manoeuvre carefully out of the stove, usually a left to right angle ﬁrst, then tilt forward.

STEP 5

To re install it, follow the same steps in reverse, then replace the ash pan.