ChilliP-A5-Manual-2020-Download

5.g To Remove the Throat Plate

Diagram illustrating the location of the throat plate.

LOCATING THE THROAT PLATE

STEP 1

Take note of the position of the throat plate before removal, the correct position is

important, it can move in transit, and it needs be be removed regularly for soot clearance.

STEP 2

To remove it – slide it forward until the back drops down. Lift it o the pins.

STEP 3

To re-install it you must push the front edge of the plate (side with the bent over lip)

over the locating pins. Then slide it back to rest on top of the teritary air channel. The

front edge will be higher than the back edge.

STEP 4

Conﬁrm by feeling that the supporting pins are located on the underside of the lip.

STEP 5

The vermiculite throat brick faces down into the ﬁre chamber, underneath the steel

throat plate. Do not use the stove without the throat brick inserted into the throat plate

or it will warp.

Throat plate (metal)Locating pin

Throat brick

(vermiculite)

Teritary air channel

Throat Plate Pin Location