Instructions / Assembly

6
water thermostat located inside of the chiller as shown in the diagram above. Use a small straight blade
screw driver. Turn clockwise to make colder. Turn counterclockwise to make warmer. Do not force the
turning pressure to the thermostat with the screwdriver, as excessive force can damage the thermostat.
Caution: Adjusting the thermostat should be performed by a licensed refrigeration technician. Adjusting
the thermostat too cold may cause the Chiller to freeze up and no water will flow, and/or the chiller may
burst causing permanent failure.
10. SPECIFICATIONS
Model #:
CHL-501
Product Type:
Under Sink Water Chiller for Residential and Office Use
Product
Dimensions:
L: 16" x W: 8" x H: 11.75" (406x203x300)
Product Weight:
23.75 lbs (10.8 KG)
Shipping
Dimensions:
L: 20.87" x W: 13" x H: 15.35" (530x330x390)
Shipping Weight:
27.25lbs (12.5 KG)
Product Color:
Appliance Grade Designer Brushed Stainless Steel Cabinet
Application:
Chills Drinking Water for Residential and Office Use.
Connects to RO Reverse Osmosis and Filtered Drinking
Water Systems.
Warranty:
1-Year Non-Transferable Limited Manufacturer's Warranty
*
Power:
110 Volts 60Hz 3 Prong Grounded Cord Attached 1.8A
140W - Motor-Compressor Thermally Protected
Certifications:
Conforms to UL Standard 399. Certified to CSA Standard
C22.2 #s 60335-2-24 & 60335-1
Refrigerant Type:
R-134a 54g (1.9oz) Environmentally Friendly
Inlet Pressure:
15~100psi (0.10~0.69MPa)
Optional Pressure Limiter Available For Use If Installation is
Not On a Reverse Osmosis RO System or Over 100 PSI.
30-50 psi (factory preset to 40 PSI) Pressure Limiter
Allows Adjustable Flow Rate to the Faucet.
Cold Water Output:
1.32 Gallons Per Hour (5 Liters 5L/H (<10C) )