Owner manual

4-15
BIOS Setup
Creating RAID Volume
To create RAID Volume, follow the steps below:
1. Reboot during POST, the following
message will appear then press
<CTRL-I> to enter Configuration Utility.
2. Enter Main Screen of Intel Rapid
Storage Technology. Select “Create
RAID Volume”, and press ENTER.
It takes BOTH hard disks in
the notebook to make
successful RAID0 volume
creation.
1
2
Intel(R) Rapid Storage Technology - Option ROM - 9.5.0.1037
Copyri gh t( C) 2003-06 Intel Co rporati on , All Rights Reserve d.
Physical Devices:
Port Devic e Mo de l Ser ial # S ize Type /Stat us (Vol ID )
4 WDC WD500 0BEVT-2 WD-WXB A8929596 465 .7GB
5 WDC WD5000BEVT-2 WD-WXB 0A 8979170 465.7
Press to enter Configuration Utility...
0 Volum e0 RAID0(S tr ipe) 128KB 931.5GB Yes
<CTRL-I>