Chiligreen MR3 Firmware Update - English Manual for Firmware Update of the MR3
Chiligreen MR3 Firmware Update - English Information The Firmware is the Main-software of your hardware Device, if you have an error during the Firmware Update, it is possible that the Hardware does not work even more. YOU NEED A 1 GB USB STICK (OR HIGHER) IN FAT32 FORMAT TO MAKE THE FIRMWARE UPDATE .
Chiligreen MR3 Firmware Update - English Change in the directory where you have depacked the Files. In this Directory there should be this Files and a CRC.txt File. Copy the Files and the CRC.txt to the root Directory of your USB Stick.
Chiligreen MR3 Firmware Update - English I can not see any picture on the TV-System while updating the Firmware Please check if the MR3 is connected via AV-OUT on the TV-System, and if the TV-System is configuried on the correctly channel. If the LEDs on the front side of the MR3 are flashing, do not disconnected or power off the MR3. The firmwareupdate now runs for 15 minutes and more. Disconnect the MR3 from the Power Supply Unit.
