User Manual

Table Of Contents

Modules

7 - 18 3.5G Module

3.5G Module

If you have included an optional 3.5G module (see “Communication” on page A -

5 for specification details) in your purchase option, you will have the appropriate

software provided for your module. Follow the instructions below to install the

USIM card (which will be provided by your service provider), and then install the

application.

Before installing the application, make sure that the 3.5G module is on. Use the

Fn+() key combination (see “Function/Hot Key Indicators” on page 1 - 10) to

toggle power to the 3.5G module. Make sure you install the drivers in the order in-

dicated in Table 4 - 1, on page 4 - 3.

1. Turn off the computer, and turn it over and remove the battery.

2. Locate the SIM card cover and loosen screw .

3. Remove the SIM card cover .



Power Safety

Warning

Before you undertake

any installation proce-

dures, make sure that

you have turned off the

power, and disconnect-

ed all peripherals and

cables (including tele-

phone lines). It is advis-

able to also remove your

battery in order to pre-

vent accidentally turning

the machine on.

Figure 7 - 13

SIM Card Cover

Removal