User Manual

Modules
7 - 6 Wireless LAN Module
7
Wireless LAN Module
If you have included an Intel ® Wi-Fi Link 5100/5300 Series (802.11 a/g/n) WLAN
module, or 3rd Party 802.11b/g WLAN m odule in your purchase option , make sure
that the Wireless LAN module is on b
efore installing the driver.
Use the Fn + F11 key combination (see Table 1 - 4, on page 1 - 10 ) to toggle p ower
to the Wireless LAN module.
When the WL AN module is powered on, the LED
will be
green and the indicator will briefly be displayed. Make sure you install
the drivers in the order indicated in
Table 4 - 1, on p age 4 - 3 .

Wireless Device
Operation Aboard
Aircraft
The use of any portable
electronic transmission de-
vices aboard aircraft is usu-
ally prohibited. Make sure
the module(s) are OFF if
you are using the computer
aboard aircraft.
Use the Fn + F11 key com-
bination to toggle power to
the WLAN module, and
check the LED indicator to
see if the module is pow-
ered on or not (see Table 1
- 4, on page 1 - 10/ Table 1
- 2, on page 1 - 7).
DO NOT use the Windows
Mobility Center to power
on/off the WLAN module as
this can cause some unex-
pected behavior.