Owner manual
Modules & Options
7 - 62 Bluetooth Module
7
Bluetooth Combo Driver Installation
Note this driver is required only for the combo Bluetooth and WLAN module only.
1. Before installing the driver make sure both WLAN and Bluetooth mod-
ules are powered on (use the Fn + F11 and Fn + F12 key combinations),
then insert the Device Drivers & Utilities + User’s Manual disc into the
CD/DVD drive. If a Found New Hardware window appears, click Cancel
in all windows that appear, and then proceed to install the driver as below.
2. Click Option Drivers (button).
3. Click 3./5.Install Combo BT Driver > Yes.
4. Choose the language you prefer and click OK.
5. Click Next.
6. Click the button to accept the license and click Next.
7. Click Next > (select if you want to create an icon to appear on the desktop)
Next > Install.
8. Click Finish.
9. The My Bluetooth icon will appear on the desktop and the Bluetooth
item will be installed in the Programs/All Programs menu.
10. See “Bluetooth Networking Setup” on page 7 - 66 for information on
Bluetooth networking.
High Speed Bluetooth
Data Transfer
The
Combination Wire-
less LAN & V3.0 Blue-
tooth module
supports
high speed (V3.0) data
transfer. However to
achieve such transfer
speeds,
both devices
must support high
speed data transfer
.
To obtain high speed
(V3.0) data transfer
make sure that both the
WLAN and Bluetooth
modules are powered
on.
Check your Bluetooth
compatible device’s doc-
umentation to confirm it
supports high speed data
transfer.