Owner manual

Modules & Options
7 - 30 3.75G/HSPA Module
7
Before installing the application, make sure that the 3.75G/HSPA module is ON
(installing the driver with the module off will not allow the software to detect the
module hardware correctly). Use the Fn + key combination (see Table 1 - 5, on
page 1 - 12) to toggle power to the 3.75G/HSPA module.
When the 3.75G/HSPA
module is powered on, the indicator will briefly be displayed. Make sure you
install the drivers in the order indicated in
Table 4 - 1, on page 4 - 3 . Note that exit-
ing the application does NOT turn off the 3.75G/HSPA module.
• Mobile Partner - See “Mobile Partner Application Installation” on page 7 -
31 for driver installation information and “Mobile Partner Application” on
page 7 - 32 for instructions on using the Mobile Partner application.
• BandLuxe HSDPA Utility - See “BandLuxe HSDPA Utility Installation” on
page 7 - 37 for driver installation information and “BandLuxe HSDPA - Con-
nection Manager” on page 7 - 38 for instructions on using the BandLuxe
HSDPA Utility.

3.75G/HSPA
Modules & System
Wake Up
Note that the 3.75G mod-
ules
DO NOT support
system wake up on
3.75G/HSPA modem ac-
tivity.