Manual

Modules & Options
Intel Turbo Memory Module 7 - 35
7
Intel Turbo Memory Setup
1. Start-up your notebook computer and press <F2> to enter the BIOS.
2. Use the arrow keys to select the Advanced menu heading.
3. Use the arrow keys to select (highlight in white) the Sata Control Sub-Menu, and
press <Enter>.
4. Press <Enter> to access the dialog box and use the arrow keys to select
Enhanced, and then press <Enter> again.
5. Use the arrow keys to select DFOROM (Robson) Support and press <Enter>.
6. Use the arrow keys to select Enabled and press <Enter>.
7. Press <Esc> to exit the menu, and then use the arrow keys to select the Boot
menu.
8. Use the “+” key to set the CD-ROM/DVD-ROM Drive as the first device in the boot
order from the Boot priority order menu (make sure the Microsoft Windows
Vista OS CD is inserted).

Intel Turbo Memory
Intel Turbo Memory
Technology is support-
ed in Windows Vista
ONLY (do not enable
this option in Windows
XP).
Figure 7 - 30
Sata Control
Sub-Menu
F1 Help  Select Item -/+ Change Values F9 Setup Defaults
Esc Exit  Select Menu Enter Select Sub-Menu F10 Save and Exit
Item Specific Help
Controls if DFOROM
Support is enabled
during POST.
Advanced
SATA: [Enhanced]
AHCI Configuration: [Disabled
]
DFOROM (Robson) Support: [Enabled]
Disabled
Enabled
Phoenix TrustedCore(tm) Setup Utility
Sata Control Sub-Menu