240-MC4 - User Manual

Installation and Operation Manual

Chilicon Power | Aug 2016

INSTALLATION OVERVIEW

A PV system using Chilicon Power microinverters is simple to install. Each microinverter mounts

on the PV racking, directly beneath each PV module. Low voltage DC wires connect from the PV

module directly to the microinverter, eliminating the risk of high DC voltage.

INSTALLATION KITS FOR CHILICON POWER MICROINVERTER SYSTEMS INCLUDE:

 AC interconnect modular trunk cable with self-terminating feature

 CP-100 Gateway Monitoring Device

REQUIRED NON-CHILICON PARTS

In addition to your PV array and its associated hardware, you need to provide the following:

 An AC connection junction box

 Mounting hardware suitable for module racking

 Sockets and wrenches for mounting hardware

MODULAR TRUNK CABLING

Trunk Cable Segment, portrait shown, 1.7M landscape also available

Branch Cable Segment, 0.5M

500

Color Codes