CP-250E-60/72-208/240-MC4 - Datasheet

Chilicon Power Microinverters
CHILICON POWER CP-250E
CP-250E™ Series Microinverters
The Chilicon CP-250E allows installers to
maximize PV system production, while
minimizing installation and operational
costs. Microinverter based architectures
offer the benefit of increased flexibility in
panel deployment, while also providing per
panel visibility to simplify system O&M.
With its all-AC approach, integrated
grounding, modular bus cabling, and ability
to support up to 20 panels on a 30A branch
circuit, the CP-250E simplifies both design
and installation. Both freq-Watt and volt-
Watt modes allow AC control by off-grid
systems. Coupled with Chilicon’s CP-100
gateway and cloud-based monitoring
software, the CP-250E can form the energy
management backbone of both residential
and commercial PV systems.
Performance
• Supports panels up to 350W with no clipping
• Maximizes energy production over life of system
• Minimizes losses due to shading and debris
• Eliminates single point of failure for system
Simplicity
• All AC design – No string calculations needed
• No GEC needed for microinverters
• Easy installation with standardized trunk cables
Versatility
• Compatible with most 60 or 72 cell panels
• Available in 240V or 208V
• Allows for variable module placement
• Robust PLC communication protocol (500 ft range)
• Self supply mode (zero-export)
• Supports up to 30A branch circuits
Reliability, Safety, & Compliance
• NEMA 6 rated construction
• 25 year warranty
• AC branch circuits will not support arc faults
• Quick disconnect circuit to mitigate grid instabilities
• NEC 690.12 rapid shutdown compliant
• CA Rule 21 (UL 1741-SA) compliant
REV250.19.01
Single Channel Microinverter
www.chiliconpower.com