AC Coupling with Microinverter Systems

September 1, 2016
[GRID INTERACTIVE ADVANCED FEATURES]
Also, you SHOULD VERIFY that the Power (W) fields ALWAYS UPDATEs EVERY 5 seconds. If the update rate is slower,
then the communication is spotty. To fix this, add zWave repeater modules in the path between the gateway and
the Gen5 HEM, or relocate the gateway. You MUST have good zWave communication between the CP-100 gateway
and the Gen5 HEM for self-supply mode to operate successfully.
ACTIVATING SELF SUPPLY MODE
To activate Self Supply Mode, Menu button . On the Settings screen, press “Advanced Settings” and then
“Measurement Setup” . Then hit “Manage Meters”