AC Coupling with Microinverter Systems

September 1, 2016
[GRID INTERACTIVE ADVANCED FEATURES]
The next step is to add the HEM to the list of paired devices. Press the “Add” button and then press the button on
the back of the HEM device once. If your meter has been successfully paired to your network, its light will remain
solid. If the pairing was unsuccessful, the light will blink. If that is the case, try repeating the procedure again.
Once the HEM is paired, you will be prompted to specify the number of clamps used (usually it will be 2) and
whether the HEM is used for generation metering (PV array only) or consumption (net home metering or any home
appliance). After exiting that window, the new paired device should show up in the list of paired devices. Note each
HEM is associated with an ID number.
DEFINING LOGICAL METERS