Assembly Instructions

Step 16
å
Insert the DRAWER SIDES (D132 and D138) at an angle
into the slot at each end of the DRAWER FRONT (L).
å
Slide the DRAWER BOTTOM (B36) into the
grooves in the DRAWER SIDES (D132 and D138) and
DRAWER FRONT (L).
å
Fasten the DRAWER BRACE (M65) to the DRAWER
FRONT (L). Tighten one HIDDEN CAM.
å
Fasten the DRAWER BACK (D183) to the DRAWER
SIDES (D132 and D138) and DRAWER BRACE (M65).
Use five BLACK 1-9/16" FLAT HEAD SCREWS (30S).
Surface with
HIDDEN CAM
12
34
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT roove.
With the palm of your hand,
tap the DRAWER BOTTOM
down into the roove.
Groove
Arrow
Maximum
210 derees
Minimum
190 derees
L
L
L
VIEW THE T-LOCK BOX VIDEO
D138
D138
B36
D132
D132
D138
D132
M65
M65
D183
Unfi nished
surface
30S
Start each screw a few turns before
completely tihtenin any of them.
BLACK 1-9/16" FLAT HEAD SCREW
(5 used in this step)
The tabs should insert freely
into the slots. Gently tilt the
DRAWER SIDES side to side
until the tabs slip into the slots.
415107www.sauder.com/services
Pae 21
Be sure the
DRAWER
BOTTOM
inserts into
the DRAWER
BACK roove.