Assembly Instructions

å
Fill the hole in the LEFT END (B2) 1/4 to 1/2 full with GLUE (54M). Then, insert a WOOD DOWEL (15F) into this hole. Wipe
away the excess GLUE.
å
Next, fi ll the hole in BOTTOM (D) 1/4 to 1/2 full with GLUE (54M).
å
Fasten the LEFT END (B2) to the BOTTOM (D). Push the WOOD DOWEL (15F) in the LEFT END (B2) into the hole in
BOTTOM (D). Wipe away the excess GLUE. Tihten two TWIST-LOCK® FASTENERS.
å
Fill the hole in the BOTTOM (D) 1/4 to 1/2 full with GLUE (54M). Then, insert a WOOD DOWEL (15F) into this hole. Wipe
away the excess GLUE.
å
Next, fi ll the hole in the RIGHT END (A2) 1/4 to 1/2 full with GLUE (54M).
å
Fasten the RIGHT END (A2) to the TOP (C), BOTTOM (D), and SHELF (E). Push the WOOD DOWEL (15F) in the BOTTOM (D)
into the hole in the RIGHT END (A2). Wipe away the excess GLUE. Tihten six TWIST-LOCK® FASTENERS.
Step 6
B2
A2
C
E
D
Finished ede
Ede with holes
Surface without TWIST-LOCK® FASTENERS
Surface with TWIST-LOCK®
FASTENERS
15F
15F
Fill the holes 1/4 to 1/2 full with GLUE.
Inspect the parts thorouhly before
assemblin. Disassembly of lued
parts is extremely di cult.
Caution
!
54M
415107www.sauder.com/services
Pae 11