Assembly Instructions

å
Fasten the LEFT END (B2) to the TOP (C) and SHELF (E).
Tihten four TWIST-LOCK® FASTENERS.
Step 5
B2
C
E
How to use the SAUDER TWIST-LOCK
®
FASTENER
1. Insert the dowel end of the FASTENER into the
hole of the adjoinin part.
NOTE: The dowel end of the FASTENER must
remain fully inserted in the hole of the adjoinin part
while lockin the FASTENER.
2. Tihten the FASTENER with a Phillips screwdriver
as tiht as possible.
Dowel end
Rounded ede
Finished ede
Ede with holes
Surface with TWIST-LOCK® FASTENERS
Surface with TWIST-LOCK®
FASTENERS
Surface with holes
415107 www.sauder.com/servicesPae 10
Do not stand the unit upriht without the
BACK fastened. The unit may collapse.
Caution