Mounting instruction – Hi-Fi-Series – HM Specification: Color: black / silver Material: complete aluminium Figure HM-01B: VFD (mou unted) DVD cover Open/ Close Volume control Power switch Navigator Resset buttton Front connectors / Card reader
Mounting instruction n – Hi-Fi-Series – HM 1. How to open the case Please loosen the four screws of the top cover. 2. Now easily remove the top covver. 3. Components, connectors and fittings are easy to reach now. Removve the three g green bolts to take out th he accessories.
Mounting instruction – Hi-Fi-Series – HM 4. Installation of the I/O shield Please mount the I/O shield on n the backside of the case. 5. Installation of the mainboard d Find the right position for the mainboard m mainboard. You can fix the board with the provided screws and the necesssary grommets. 6. Installation of the PSU Place the PSU in the right position (as shown on the image) and fix it with four screws.
Mounting instruction – Hi-Fi-Series – HM 7. Installation of 3,5“ HDD (only y HM-01 / HM-02) To install a 3,5“ HDD use the ne ecessary screws (Img. 1) provided in the accessory box. Im mg.1 g HDD Screw 8. Press the red tagged levers an nd open the cage g like shown on the image. g . 9 Now you can put the HDD upright in the 9. HDD cage.
Mounting instruction n – Hi-Fi-Series – HM 10. Now close the cage but be ca areful with the special HDD screws. IMPORTANT! ATTENTION!!! 11. Installation of 3,5“ HDD (on nly HM-03) Please see step 7 first. In ord der to mount th HDD on the the th bottom b tt off the the cage, install the screws in the middle and rear holes of the HDD. Be careful when you e not to slide in the HDD into the cage touch the nearby iMON modu ule . 12. Hold the HDD horizontally an nd slide it into the cage.
Mounting instruction – Hi-Fi-Series – HM 13. Installation of the 5,25“ de evice To install a 5 5,25 25“ ODD use the necessary white screws (Img. 2) provid ded in the accessory box. I Img.2 2 ODD S Screw 14. Put the ODD in the slide rails like shown on the image and fix it with the safety hook on g Now connecct all components, p , the ODD cage. e.g. motherboard, VGA card d, fans etc. with the PSU. 15. Connect the front cables of o the case E.g. Power Switch, Power LED, L Reset button, etc.
