Datasheet

WMAH3 Installation Instructions
4
ADJUSTMENTS
Micro Height Adjustment
1. Rotate micro adjustment collar to raise or lower projector
mount as desired. (See Figure 4)
Figure 4
Quick-release Button Height Adjustment
1. Loosen locking set screw with 5/64" hex key (C) to release
quick-release button adjustment mechanism. (See Figure
5)
2. Press quick-release button and adjust height to desired
level. (See Figure 5)
3. Tighten locking set screw with 5/64" hex key (C) to lock
mount in its current position. (See Figure 5)
Figure 5
micro adjustment collar
quick-release
button
2
(rear view)
2
3
1