Datasheet

Installation Instructions WMAH3

TOOLS REQUIRED / PARTS PROVIDED

ATTACHING WMAH3 TO SHORT THROW

PROJECTOR

1. Use 1/8" hex key (D) and four #10-24 x 3/8" button head cap

screws (B) to secure WMAH3 (A) to short throw projector

mounting plate. (See Figure 1)

Figure 1

MOUNTING PROJECTOR MOUNT TO WMAH3

1. Press quick-release button to lower interior pipe to desired

mounting height. (See Figure 2)

2. Tighten locking set screw with 5/64" hex key (C) to lock

mount in its current position. (See Figure 2)

Figure 2

NOTE: Micro height adjustment is still possible with set screw

tightened, but the set screw must be loosened in order

to adjust height with the quick release button. See

Adjustments section for details.

3. Thread projector mount onto interior pipe by rotating until

hand tight.(See Figure 3)

Figure 3

4. Complete installation following projector mount and short

throw mount installation instructions.

5/64"

(included)

A (1)

[WMAH3]

D (1)

1/8"

B (4)

10-24 x 3/8"

C (1)

5/64"

(included)

1/8"

(B) x 4

short throw mounting

plate

(A)

quick-release

button

(rear view)

(RSM shown)