Datasheet

WM2I Installation Instructions
6
• Split Mount Covers
1. Remove two Phillips pan head screws from upper cover.
(See Figure 4)
2. Raise upper cover away from the mount. (See Figure 4)
Figure 4
3. Remove lower cover from mount. (See Figure 5)
Figure 5
Install WMI
1. Connect USB cable (H) to cartridge in interactive cover (B),
and route cable through strain relief channel on cartridge.
2. Route cables from projector through strain relief channel on
cartridge in interactive cover (B). (See Figure 6)
Figure 6
3. Raise the interactive cover (B) containing cartridge and
attach to wall mount using two 8-32 x 3/8" Phillips pan head
screws (M) [or using two 8-32 x 3/8" security button head
screws (L)]. (See Figure 7)
Figure 7
1
x 2
2
3
Route cables
Cartridge
1
Cartridge
(B)
2
3
(M or L) x 2
(B)
3