INSTALLATION INSTRUCTIONS Instrucciones de instalación Installationsanleitung Instruções de Instalação Istruzioni di installazione Installatie-instructies Instructions d´installation Interactive Whiteboard Mount Spanish Product Description German Product Description Portuguese Product Description Italian Product Description Dutch Product Description French Product Description WBM2
WBM2 Installation Instructions DISCLAIMER Milestone AV Technologies and its affiliated corporations and subsidiaries (collectively "Milestone"), intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use of this product.
Installation Instructions WBM2 DIMENSIONS 1192.1 46.
WBM2 Installation Instructions LEGEND Tighten Fastener Pencil Mark Apretar elemento de fijación Marcar con lápiz Befestigungsteil festziehen Stiftmarkierung Apertar fixador Marcar com lápis Serrare il fissaggio Segno a matita Bevestiging vastdraaien Potloodmerkteken Serrez les fixations Marquage au crayon Loosen Fastener Drill Hole Aflojar elemento de fijación Perforar Befestigungsteil lösen Bohrloch Desapertar fixador Fazer furo Allentare il fissaggio Praticare un foro Bevestiging
Installation Instructions WBM2 TOOLS REQUIRED FOR INSTALLATION 1/8" - wood stud 1/4" - concrete, brick 7/16" PARTS B (4) [Toggler] E (1) 5/32" A (4) 1/4" G (4) [Isolation washer] C (4) 1/4-20 x 2-1/2" H (4) 1/4-20 x 1" D (2) [Upright assembly] F (2) 1/4-20 x 3/8" J (4) .500x.320x.425 S (2) .4 x .255 x .0625 K (1) [Wall assembly] L (2) [Wall bracket cover] NOTE: No parts "N", "P", "Q", "R" included.
WBM2 Installation Instructions ASSEMBLY AND INSTALLATION Installing to a Wood Stud Wall The WBM2 will allow an interactive whiteboard to be installed over an existing chalkboard or whiteboard. The WBM2 may be installed in the default position which installs in front of preexisting chalk or marker trays, OR in the low profile position which installs on the top of preexisting chalk or marker trays. 1. Determine the center of the chalkboard. 2.
Installation Instructions 2. WBM2 Using a level, mark the wall above existing chalkboard through top mounting hole in the wall assembly (K). (See Figure 3) 4 8 (B) x 4 (D) x 2 Interactive white board 2 3 6 7 (K) (G) x 4 (J) x 4 5 9 (A) x 4 (C) x 4 Figure 3 3. Drill one 1/4" x 2-3/4" pilot hole at each marking. (See Figure 3) 4. Install a toggler (B) into both pilot holes using a hammer. (See Figure 3) 5.
WBM2 Installation Instructions 5. Adjustments Lateral Movement 1. Loosen one button head cap screw at top of upright assembly (D). (See Figure 6) 2. Slide upright assembly left or right on wall assembly (K), as necessary. (See Figure 6) 3. Tighten button head cap screw to fasten upright assembly into place. (See Figure 6) Tighten four Phillips head screws (H) into four isolation washers (G) and spacers (J) to fasten white board to upright assembly (D).
Installation Instructions WBM2 Adding Covers 1. Open the lower flaps of the wall bracket cover (L) outward. (See Figure 10) 2. Slide the cover downward, hooking the top of the wall bracket covers (L) onto the tabs on top of wall assembly brackets. (See Figure 10) 3. Slide the lower flaps of the wall bracket cover (L) under the bottom of the wall assembly brackets (K). (See Figure 10) (M) 4 (M) (L) (L) 1 (K) 1 Wall bracket tab 2 Figure 11 Figure 10 4.
WBM2 10 Installation Instructions
Installation Instructions WBM2 11
WBM2 Installation Instructions USA/International Europe Chief Manufacturing, a products division of Milestone AV Technologies 8800-002101 Rev07 2012 Milestone AV Technologies, a Duchossois Group Company www.chiefmfg.com 07/12 Asia Pacific A P F A P F A 6436 City West Parkway, Eden Prairie, MN 55344 800.582.6480 / 952.225.6000 877.894.6918 / 952.894.6918 Franklinstraat 14, 6003 DK Weert, Netherlands +31 (0) 495 580 852 +31 (0) 495 580 845 Office No.
