Specifications

Installation Instructions TA502
7
Figure 6
TS118/218SU Installation
IMPORTANT ! : The TA502 was designed specifically for
the TS118SU and TS218SU wall mounts. Do not attempt
to install any other wall mounts with the TA502!
1. Use four 5/16-18 x 1/2" button head cap screws (M) to
attach attach bracket (P) to the TA502 (A). (See Figure 7)
Figure 7
2. Partially install 1/4-20 x 1/2" button head cap screw (N) into
corresponding hole on attach bracket (P), leaving screw
hanging out 1/4" from bracket. (See Figure 8) or (See Figure
9)
3. Hang TS118/218SU mount onto screw by latching key-
shaped hole over screw. (See Figure 8) or (See Figure 9)
Figure 8
Figure 9
4. Use one (TS118SU) or two (TS218SU) 1/4-20 x 1/2" button
head cap screws (N) to attach TS118/218SU to attach
bracket (P). (See Figure 10) and (See Figure 11)
5. Tighten all screws to secure TS118/218SU to attach bracket
(P). (See Figure 10) and (See Figure 11)
Grounding Lug Locations
(P)
1
(M) x 4
1/4"
3
TS118SU
(TS118SU
install)
2
(N)
2
(N)
TS218SU
1/4"
3
(TS218SU
install)