INSTALLATION INSTRUCTIONS THINSTALL™ IN-WALL ENCLOSURE Spanish Product Description German Product Description Portuguese Product Description Italian Product Description Dutch Product Description French Product Description TA500
TA500 Installation Instructions DISCLAIMER Milestone AV Technologies, and its affiliated corporations and subsidiaries (collectively, "Milestone"), intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use of this product.
Installation Instructions TA500 DIMENSIONS 3.96 100.5 NOTES: 1. ELECTRICAL KNOCK OUTS: • SINGLE GANG RACO 590. STEEL CITY CY 1/2, OR SIMILAR STYLE ELECTRICAL BOX. • 1" AND 2" TRADE PIPE CONDUIT. 2. PRODUCT WORKS WITH TS525 AND TS325. 35.65 905.
TA500 Installation Instructions TOOLS REQUIRED FOR INSTALLATION 3/16" PARTS Grounding screw and washer installed at factory Earthing symbol IEC 60417 No. 5019 affixed adjacent to grounding terminal.
Installation Instructions TA500 INSTALLATION WARNING: EXPLOSION AND FIRE HAZARD! CUTTING OR DRILLING INTO GAS PLUMBING CAN CAUSE DEATH OR SERIOUS PERSONAL INJURY! ALWAYS make certain area behind mounting surfaces is free of gas, water, waste, or any other plumbing before cutting, drilling, or installing fasteners. WARNING: IMPROPER INSTALLATION CAN RESULT IN DEATH OR SERIOUS PERSONAL INJURY! This accessory should be installed by qualified personnel. Site Preparation Locate and Prepare Mounting Site 2.
TA500 Installation Instructions 4. Add new stud (floor to ceiling) with outer edge 40 1/2" to the right of left edge of far left stud. (See Figure 2) 5. Add support framing inside far left stud and added stud from the floor to the lower edge of header. Use #10 x 2 1/2" countersunk wood screws (not provided) as needed to secure. (See Figure 2) 6. Install 2" x 6" header 37 1/2" long from inside edge of left stud to inside edge of new stud.
Installation Instructions TA500 6 DANGER: IMPROPER WIRING CAN LEAD TO DEATH (D) x 4 OR SEVERE PERSONAL INJURY! Grounding must be installed by qualified personnel using a UL Recognized No. 12AWG grounding wire connected to grounding lug on mount. (B) x 4 Grounding Lug Locations x 5 x4 Figure 4 NOTE: The TA500 has 1/2" total clearance between the two studs. The spacers allow side to side adjustment. Figure 6 7.
TA500 Installation Instructions (TS525TU) 4. Tighten two screws (M) to secure upper wall plate to upper attachment brackets. 5. Slide TS325TU/TS525TU assembly onto upper wall plate of TS325TU/TS525TU. (See Figure 10) 5 (N) x 4 1 (M) x 8 TS325TU assembly shown Figure 8 2. Figure 10 Use two 5/16-18 x 1/2" button head cap screws (M) to loosely attach upper wall plate of TS325TU/TS525TU to upper attachment brackets (N).
Installation Instructions 7. TA500 Place two installation spacers (included with TS325TU/ TS525TU) over two 5/16-18 x 1/2" button head cap screws (M). (See Figure 11) 8. Tighten two screws (M) to secure lower wall plate to lower attachment brackets. 9. Loosen flat head cap screws on upper carriage rail in order to loosen white spacer. (See Figure 12) (G) x 4 (TS325TU/TS525TU mount not shown for clarity) 3 10. Remove white spacer from mount. (See Figure 12) 11. Tighten flat head cap screws.
TA500 10 Installation Instructions
Installation Instructions TA500 11
TA500 Installation Instructions USA/International Chief Manufacturing, a products division of Milestone AV Technologies Europe Asia Pacific 8800-002234 Rev01 2012 Milestone AV Technologies, a Duchossois Group Company www.chiefmfg.com 12/12 A P F A P F A 6436 City West Parkway, Eden Prairie, MN 55344 800.582.6480 / 952.225.6000 877.894.6918 / 952.894.6918 Franklinstraat 14, 6003 DK Weert, Netherlands +31 (0) 495 580 852 +31 (0) 495 580 845 Office No.