Specifications

Installation Instructions RSM Elite Series Projector Mounts

Rough Alignment of RSM

1. Turn RSM clockwise or counter-clockwise until

front of mount is facing target.

2. Secure RSM to pipe by turning set screw until tight.

CAUTION: DO NOT OVERTIGHTEN!

Overtightening of setscrew can damage threads on

pipe.

3. Turn security screw using a Phillips screwdriver

until set screw cannot be seen through access hole

in RSM.

(A)

(bottom view)

RSM INSTALLATION

NOTE: Models RSM-A/RSM-B/RSM-C/RSM-D are

identical EXCEPT each provides a different

keyed lock.

Threaded Pipe Installation

1. Carefully determine required mounting location.

IMPORTANT ! : This will require knowing the

lens to screen distance. See projector

specifications for details on determining this

distance.

2. Install Listed ceiling plate (not included) and Listed

extension accessories (not included) following

installation instructions provided by manufacturer.

WARNING: IMPROPER INSTALLATION CAN

RESULT IN SERIOUS PERSONAL INJURY OR

DAMAGE TO EQUIPMENT! Structural members

MUST be capable of supporting five times the

combined weight of all equipment being mounted.

3. Align RSM with end of NPT pipe.

4. Thread RSM up onto pipe by turning until hand

tight.

(not included)