Specifications

RSA Projector Mounts Installation Instructions
8
Ø 2.5mm
(Ø 3/32”)
45mm
(1-3/4”)
INSTALLATION
1a
Wood Stud Installation
1. Carefully determine required mounting location.
IMPORTANT ! : This will require knowing the lens
to screen distance. See projector specifications for
details on determining this distance.
WARNING: IMPROPER INSTALLATION CAN
RESULT IN SERIOUS PERSONAL INJURY OR
DAMAGE TO EQUIPMENT! Structural members
MUST be capable of supporting five times the
combined weight of all equipment being mounted.
2. Using the RSA as a guide, mark four mounting hole
locations with a pencil or similar tool.
3. Drill four 3/32" (2.5mm) dia. pilot holes to a depth of
1-3/4" (45mm) deep.
4. Align four mounting holes in RSA with four pilot
holes.
IMPORTANT ! : Make sure mount is properly
oriented towards target before securing to
structure.
5. Secure RSA to structure using four #10 flat washers
and four #10 x 3" Phillips head wood screws (not
included).
X4
X4
3
1
2
4
Ø 2.5mm
(Ø 3/32”)
45mm
(1-3/4”)
5
(A)
x 4