Specifications

Installation Instructions RSA Projector Mounts
13
Pitch Adjustment
1. Loosen pitch adjustment locking screw on each end
of the RSA projector mount using a #2 Phillips
screwdriver.
2. Adjust projector angle to desired pitch.
3. Tighten pitch adjustment locking screw on each end
of the RSA projector mount using a #2 Phillips
screwdriver.
ADJUSTMENTS
YAW Adjustment
1. Loosen yaw adjustment screw using a 5/32" hex
key.
NOTE: Yaw is only adjustable when attached to a
threaded pipe.
WARNING: Do not turn the projector to the end of
the pipe threads. The projector, interface plate and
projector will fall from the pipe if it is unthreaded too
far!
2. Adjust projector by turning the projector on the pipe
to the desired yaw position.
3. Tighten yaw adjustment locking screw using a 5/32"
hex key.
3a
3
Example Only
(Interface bracket
varies dependent
on projector model)
Example Only
(Interface bracket
varies dependent
on projector model)
1
3
2
1
3
2