INSTALLATION INSTRUCTIONS Instructions d´installation Istruzioni di installazione Installationsanleitung Instrucciones de instalación Installatie-instructies Instruções de Instalação RSA Projector Mounts RPA Elite Series Projector Mount RPA Elite Series Projector Mount RPA Elite Series Projector Mount RPA Elite Series Projector Mount RPA Elite Series Projector Mount RPA Elite Series Projector Mount RSA
RSA Projector Mounts Installation Instructions DISCLAIMER Milestone AV Technologies, and its affiliated corporations and subsidiaries (collectively, "Milestone"), intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use of this product.
Installation Instructions WARNUNG: Wenn das zulässige Gewicht überschritten wird, kann dies zu schweren Körperverletzungen oder Schäden an den Geräten führen! Der Monteur ist dafür verantwortlich, dass das kombinierte Gewicht aller Komponenten, die am Modell RSA befestigt sind, nicht mehr als 11.34 kg beträgt. ADVERTÊNCIAS e AVISOS IMPORTANTES! ADVERTÊNCIA: Os alertas de ADVERTÊNCIA avisam-no para a possibilidade de ocorrência de graves lesões ou morte no caso de incumprimento das instruções.
RSA Projector Mounts Installation Instructions WAARSCHUWING: Overschrijding van het draagvermogen kan de oorzaak zijn van ernstig persoonlijk letsel en beschadiging van de apparatuur! Degene die het product installeert is ervoor verantwoordelijk dat het totale gewicht van alle componenten die aan de RSA worden bevestigd een gewicht van 11.34 kg niet overschrijdt.
Installation Instructions RSA Projector Mounts LEGEND Tighten Fastener Pencil Mark Serrez les fixations Marquage au crayon Serrare il fissaggio Segno a matita Befestigungsteil festziehen Stiftmarkierung Apretar elemento de fijación Marcar con lápiz Bevestiging vastdraaien Potloodmerkteken Apertar fixador Marcar com lápis Loosen Fastener Drill Hole Desserrez les fixations Percez un trou Allentare il fissaggio Praticare un foro Befestigungsteil lösen Bohrloch Aflojar elemento de fijaci
RSA Projector Mounts Installation Instructions Hammer Target of Projector Martillo Punto de enfoque del proyector Hammer Ziel des Projektors Martelo Mira do projector Martello Punto di proiezione Hamer Doel van de projector Marteau Cible du projecteur TOOLS REQUIRED FOR INSTALLATION 7/16" #2 7/32" (6mm) dia.
Installation Instructions RSA Projector Mounts 1 (not included) RSA INSTALLATION Threaded Pipe Installation 1. IMPORTANT ! : This will require knowing the lens to screen distance. See projector specifications for details on determining this distance. 2 (not included) 2. 4 Carefully determine required mounting location. 3 Install Listed ceiling plate (not included) and Listed extension accessories (not included) following installation instructions provided by manufacturer.
RSA Projector Mounts Installation Instructions INSTALLATION Wood Stud Installation 1a 1. Carefully determine required mounting location. IMPORTANT ! : This will require knowing the lens to screen distance. See projector specifications for details on determining this distance. 1 WARNING: IMPROPER INSTALLATION CAN RESULT IN SERIOUS PERSONAL INJURY OR DAMAGE TO EQUIPMENT! Structural members MUST be capable of supporting five times the combined weight of all equipment being mounted. X4 2 Ø 2.
Installation Instructions RSA Projector Mounts Concrete Installation 1b 1. Determine mounting location. WARNING: IMPROPER INSTALLATION CAN RESULT IN SERIOUS PERSONAL INJURY OR DAMAGE TO EQUIPMENT! Structural members MUST be capable of supporting five times the combined weight of all equipment being mounted. 1 2. Using the RSA as a guide, mark four mounting hole locations on ceiling using a pencil or similar tool. 3. Drill four 1/4" (6.3mm) diameter pilot holes to a depth of 2-1/2" (64mm) deep. 4.
RSA Projector Mounts 1c Installation Instructions 1 Threaded Rod Installation 2 The RSA can be secured to unistrut, angle or channel assembly overhead structural members (trusses or Ibeams) using four #10-24 diameter threaded rods. WARNING: IMPROPER INSTALLATION CAN RESULT IN SERIOUS PERSONAL INJURY OR DAMAGE TO EQUIPMENT! Structural members MUST be capable of supporting five times the combined weight of all equipment being mounted. 4 1. Carefully determine required mount position.
Installation Instructions RSA Projector Mounts Example Only (Interface bracket varies dependent on projector model) 2a WARNING: IMPROPER INSTALLATION CAN LEAD TO PROJECTOR FALLING RESULTING IN SERIOUS PERSONAL INJURY OR DAMAGE TO EQUIPMENT. DO NOT substitute hardware. Use only the hardware provided by the manufacturer. 1 1. Secure interface bracket to mount using installation instructions and hardware provided with interface bracket.
RSA Projector Mounts Installation Instructions Example Only (Interface bracket varies dependent on projector model) 2c Securing Projector with Interface Bracket to Model RSA Mount. WARNING: IMPROPER INSTALLATION CAN LEAD TO PROJECTOR FALLING RESULTING IN SERIOUS PERSONAL INJURY OR DAMAGE TO EQUIPMENT. Make certain mounting slots in mount base slide under thumb screws and that screws are seated in the back of slots. 1. 1 12 X4 Turn thumb nuts until tight to secure projector to mount.
Installation Instructions RSA Projector Mounts 3 Example Only (Interface bracket varies dependent on projector model) ADJUSTMENTS YAW Adjustment 1. Loosen yaw adjustment screw using a 5/32" hex key. NOTE: Yaw is only adjustable when attached to a threaded pipe. WARNING: Do not turn the projector to the end of the pipe threads. The projector, interface plate and projector will fall from the pipe if it is unthreaded too far! 2 2.
RSA Projector Mounts Installation Instructions 3b 1 Roll Adjustment 1. Loosen roll adjustment locking screw on each side of the RSA projector mount using a #2 Phillips screwdriver. 2. Adjust projector to desired roll position. 3. Tighten roll adjustment locking screw on each side of the RSA projector mount using a #2 Phillips screwdriver.
Installation Instructions RSA Projector Mounts 15
RSA Projector Mounts Installation Instructions USA/International Europe Chief Manufacturing, a products division of Milestone AV Technologies 8800-002005 Rev01 2010 Milestone AV Technologies, a Duchossois Group Company www.chiefmfg.com 11/10 Asia Pacific A P F A P F A 8401 Eagle Creek Parkway, Savage, MN 55378 800.582.6480 / 952.894.6280 877.894.6918 / 952.894.6918 Fellenoord 130 5611 ZB EINDHOVEN, The Netherlands +31 (0)40 2668620 +31 (0)40 2668615 Office No.
