Datasheet

2. Using four 10-24 button head cap screws, attach top and bottom to side brackets (see Figure 4 &
Figure 5).
3. Place Nylon spacers over mounting holes on back of screen. Attach mounting brackets to display
using M8 screws with steel washers (see Figures 6 & Figure 7).
4. With the aid of another person, lift your display up to the Chief Mount, aligning buttons of mounting
brackets with slots in the Chief Mount.
5. Lower safety latch on the Chief Mount to secure your display, making sure latch is completely
engaged.
Figure 4
Figure 5
Figure 6 Figure 7