Datasheet

2. Place interface bracket over mounting holes on back of screen. Attach mounting brackets to the
display using the 12mm or 16mm M8 screws (see Figure 4 & Figure 5).
3. If necessary, stack white and black nylon spacers over mounting holes and use longer M8
screws to clear any protrusions on the back of the display. Select the best white nylon spacer
that best works with your particular display (see Fig 6).
4. With the aid of another person, lift your display up to the Chief Mount, aligning buttons of mounting
brackets with slots in the Chief Mount.
5. Lower safety latch on the Chief Mount to secure your display, making sure latch is completely
engaged.
Figure 4 Figure 5
Figure 5