Datasheet

Model: PPH-2000 Installation Instructions
8
INSTALL STATIC BRACKETS
AKIRA 84", ORION 84", AND MODULAR 84"
DISPLAYS
1. Using key (260), loosely install brackets (20) to plates
(10) with screws (150) (See Figure 11). Ensure the
following:
• Brackets (20) are installed to outside set of
mounting holes, closest to supports (40).
• Brackets (20) are installed so that square cut outs
are towards top of mount.
2. Tighten all 16 screws (150) securely.
Figure 11: Installation on Outside Mounting Holes
OTHER LARGE FLAT PANEL DISPLAYS
1. Determine horizontal dimension between mounting
buttons on back of display (or interface bracket, if
required) (See Figure 12).
Figure 12: Horizontal Dimension
2. Using key (260), loosely install brackets (20) to plates
(10) with screws (150) according to dimension noted
in previous step. Ensure that brackets (20) are
installed so that square cut outs are towards top of
mount.
• 14" horizontal dimension: Install brackets (20) to
inside set of mounting holes, closest to center of
mount (See Figure 13).
• 24" horizontal dimension: Install brackets (20) to
middle set of mounting holes (See Figure 14).
• 33" horizontal dimension: Install brackets (20) to
outside set of mounting holes, closest to supports
(40) (See Figure 11).
3. Tighten all 16 screws (150) securely.
Figure 13: Installation on Inside Mounting Holes
Figure 14: Installation on Middle Mounting Holes
(150)
(16 Places)
Square
Cut Out
Mounting Buttons
(6 buttons shown;
4 buttons similar)
Back of Display
(150)
(16 Places)
Square
Cut Out
(150)
(16 Places)
Square
Cut Out