INSTALLATION INSTRUCTIONS Swivel Accessory for Carts and Stands PAC790
PAC790 Installation Instructions DISCLAIMER WARNING: Failure to read, thoroughly understand, and Milestone AV Technologies, and its affiliated corporations and subsidiaries (collectively, "Milestone"), intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use of this product.
Installation Instructions PAC790 LEGEND Tighten Fastener Pencil Mark Apretar elemento de fijación Marcar con lápiz Befestigungsteil festziehen Stiftmarkierung Apertar fixador Marcar com lápis Serrare il fissaggio Segno a matita Bevestiging vastdraaien Potloodmerkteken Serrez les fixations Marquage au crayon Loosen Fastener Drill Hole Aflojar elemento de fijación Perforar Befestigungsteil lösen Bohrloch Desapertar fixador Fazer furo Allentare il fissaggio Praticare un foro Bevestig
Installation Instructions PAC790 TOOLS REQUIRED FOR INSTALLATION 3/16" (included) PARTS B(4) 5/16-18 x 5/8" A (1 [swivel accessory] C(1) 3/16" 4
Installation Instructions PAC790 ASSEMBLY CAUTION: ALWAYS remove the display(s) BEFORE adjusting the height of the cart/stand. Attaching Head to Cart/Stand Assembly IMPORTANT ! : When attaching head assembly ensure that the ClickConnect lock is at TOP of head assembly. (See Figure 1) 1. Attach PSBU or MSBU interface bracket(s) to the display(s) following the instructions included with the bracket. 1. Slide swivel accessory (A) into the cart/stand assembly. (See Figure 1) 2.
PAC790 Installation Instructions recommended that a bolt (not provided) be placed through the head assembly (See Figure 4) to lock the display into the upright position. Swivelling Display The display can be swivelled up to 15° either left or right from a straight upright position. Remove pin 4 and nut and move to lower holes 1. Swivel display to the left or right up to 15° until desired position is reached. (See Figure 5) 2.
Installation Instructions 1 Remove bolt or padlock if used PAC790 2 Pin in "Closed" position move to "Open" position to remove display 4 Pin in "Open" position move to "Closed" position after display is removed.
PAC790 Installation Instructions USA/International Europe Chief Manufacturing, a products division of Milestone AV Technologies 8807-002001 Rev 00 ©2009 Milestone AV Technologies, a Duchossois Group Company www.chiefmfg.com 05/09 Asia Pacific A P F A P F A 8401 Eagle Creek Parkway, Savage, MN 55378 800.582.6480 / 952.894.6280 877.894.6918 / 952.894.
