INSTALLATION INSTRUCTIONS MTM1U MSM1U LSM1U LTM1U FUSION HEIGHT ADJUST FLAT PANEL MOUNTS MSM1U/MTM1U/LSM1U/LTM1U
MSM1U/MTM1U/LSM1U/LTM1U Installation Instructions DISCLAIMER Milestone AV Technologies, and its affiliated corporations and subsidiaries (collectively "Milestone"), intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use of this product.
Installation Instructions MSM1U/MTM1U/LSM1U/LTM1U DIMENSIONS MSM1U 6.00 152.4 1. 2. 3. RAILS CAN BE SLID LEFT OR RIGHT FOR OFFSET MAXIMUM MOUNTING PATTERN IS 22.7" (576 mm) WITHOUT REVERSING UPRIGHTS MAXIMUM MOUNTING PATTERN IS 25.3" (642 mm) WITH REVERSING UPRIGHTS FOR RECESSED APPLICATIONS, MINIMUM VERTICAL LIFT FOR HOOK ENGAGEMENT IS .75" (19) mm) DIMENSIONS: [MILLIMETERS] INCHES MTM1U 6.00 152.4 RAILS CAN BE SLID LEFT OR RIGHT FOR OFFSET 1. 2. 3. MAXIMUM MOUNTING PATTERN IS 22.
MSM1U/MTM1U/LSM1U/LTM1U Installation Instructions DIMENSIONS--continued LSM1U 16.00 406.4 MINIMUM WALL UPRIGHT SPACING 6.00 152.4 RAILS CAN BE SLID LEFT OR RIGHT FOR OFFSET 1. 2. 3. MAXIMUM MOUNTING PATTERN IS 31.7" (805 mm) WITHOUT REVERSING UPRIGHTS MAXIMUM MOUNTING PATTERN IS 34.3" (871 mm) WITH REVERSING UPRIGHTS FOR RECESSED APPLICATIONS, MINIMUM VERTICAL LIFT FOR HOOK ENGAGEMENT IS .75" (19 mm) DIMENSIONS: [MILLIMETERS] INCHES LTM1U 16.00 406.4 MINIMUM WALL UPRIGHT SPACING 6.00 152.
Installation Instructions MSM1U/MTM1U/LSM1U/LTM1U LEGEND Tighten Fastener Pencil Mark Apretar elemento de fijación Marcar con lápiz Befestigungsteil festziehen Stiftmarkierung Apertar fixador Marcar com lápis Serrare il fissaggio Segno a matita Bevestiging vastdraaien Potloodmerkteken Serrez les fixations Marquage au crayon Loosen Fastener Drill Hole Aflojar elemento de fijación Perforar Befestigungsteil lösen Bohrloch Desapertar fixador Fazer furo Allentare il fissaggio Praticare u
MSM1U/MTM1U/LSM1U/LTM1U Installation Instructions TOOLS REQUIRED FOR INSTALLATION 3/16" x 10" (included) 1/8" (included) 7/32" (5.5mm) Wood Stud 3/8" (9.
Installation Instructions MSM1U/MTM1U/LSM1U/LTM1U INSTALLATION The MSM1U/MTM1U/LSM1U/LTM1U mounts are designed to be mounted to a bare 8" concrete, 8"x8"x16" concrete block; or 2" x 4" wood studs (16" on center for MSM1U/MTM1U, and 16" or 24" on center for LSM1U/LTM1U) wall covered by drywall of 5/8" maximum thickness. The MTM1U and LTM1U have brackets which allow the TV to be tilted. The MSM1U and LSM1U have static brackets which keep the TV in an upright position. Locate Mounting Site 5.
MSM1U/MTM1U/LSM1U/LTM1U Installation Instructions Installing to a Concrete Wall 1. Determine the center of the TV screen, and where it should be located on the wall. 2. Line up the notches on mount (CC) with center of screen marking to determine vertical center. (See Figure 1) 3. Measure up 8" (203.2mm) from the center point to mark location of the upper mounting slots. (See Figure 1) 4. Using a level, mark the wall through both upper mounting slots. (See Figure 3) 12. Drill 3/8" x 3-1/2" (9.
Installation Instructions MSM1U/MTM1U/LSM1U/LTM1U NOTE: The nesting spacers (MA) may be used separately, or Attaching Interface Brackets to Screen 1. put two together in different configurations to create different size spacers. (See Figure 6) Align the center of the bracket (Y and Z or AA and BB) with center of screen. (See Figure 5) NOTE: The diamond-shape holes in the bracket correspond to the center of the mount. (A-L) (Stacked) (Nested) (Single) (MA) (MB) .563" .391" .
MSM1U/MTM1U/LSM1U/LTM1U 3. Installation Instructions If necessary, the tilt interface bracket knobs may be switched to allow the interface brackets (AA and BB) to be reversed. (See Figure 8) a. Remove display from mount. b. Remove interface brackets from display. c. Hold the right interface bracket horizontally, tightly gripping it so that spacers do not move. d. Remove the knob and screw. e. Replace the knob and screw in the opposite order, with the knob on the inside of the bracket. f.
Installation Instructions 2. MSM1U/MTM1U/LSM1U/LTM1U Hang screen onto the top rail of the mount (CC). (See Figure 11) • MSM1U / LSM1U: Hang top hook of interface brackets (Y and Z) onto the top rail of the mount (CC). (See Figure 11) • MTM1U / LTM1U: Move latch on top of interface bracket to OPEN position and hang top hook of interface brackets (AA and BB) onto the top rail of the mount (CC). (See Figure 11) NOTE: The screen initially installs into the "service mode" to allow easy cable access. 3.
MSM1U/MTM1U/LSM1U/LTM1U Installation Instructions Adjustments Tilt (MTM1U / LTM1U Only) Horizontal Adjustment The interface brackets (AA and BB) allow from -2° to 12° tilt, and can be locked at 0°, 6° and 12°. 1. The mount wall brackets may be adjusted side to side at the point of attachment. (See Figure 12) 1 3" horizontal adjustment possible 1. Loosen the interface bracket knob. 2. Adjust tilt as required. (See Figure 14) 3.
Installation Instructions MSM1U/MTM1U/LSM1U/LTM1U Locking Screen Interface Brackets (Optional) Locking Mount (Optional) 1. 1. Lock screen interface brackets onto mount rails using one 3/8-16 x 3/4" set screw (U) on each interface bracket. (See Figure 15) Add padlock (not included) to interface bracket to complete security. (See Figure 16) NOTE: The padlock maximum shackle diameter is 5/16" (7.9 mm). 1 (U) x 2 (MTM1U / LTM1U) (MSM1U / LSM1U) Padlock shackle maximum diameter: - 5/16" (7.
MSM1U/MTM1U/LSM1U/LTM1U 14 Installation Instructions
Installation Instructions MSM1U/MTM1U/LSM1U/LTM1U 15
MSM1U/MTM1U/LSM1U/LTM1U Installation Instructions USA/International Europe Chief, a products division of Milestone AV Technologies 8800-002623 Rev02 2015 Milestone AV Technologies www.chiefmfg.com 01/15 Asia Pacific A P F A P F A 6436 City West Parkway, Eden Prairie, MN 55344 800.582.6480 / 952.225.6000 877.894.6918 / 952.894.6918 Franklinstraat 14, 6003 DK Weert, Netherlands +31 (0) 495 580 852 +31 (0) 495 580 845 Office No.
