INSTALLATION INSTRUCTIONS VESA Interface Bracket Spanish Product Description German Product Description Portuguese Product Description Italian Product Description Dutch Product Description French Product Description MSBV
MSBV DISCLAIMER Legrand | AV and its affiliated corporations and subsidiaries (collectively “Legrand | AV”), intend to make this manual accurate and complete. However, Legrand | AV makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use of this product. The information contained in this document is subject to change without notice or obligation of any kind.
Installation Instructions MSBV DIMENSIONS DIMENSIONS: INCHES LEGEND Tighten Fastener Phillips Screwdriver Apretar elemento de fijación Destornillador Phillips Befestigungsteil festziehen Kreuzschlitzschraubendreher Apertar fixador Chave de fendas Phillips Serrare il fissaggio Cacciavite a stella Bevestiging vastdraaien Kruiskopschroevendraaier Serrez les fixations Tournevis à pointe cruciforme Сожмите Застежку Отвертка Loosen Fastener Aflojar elemento de fijación Befestigungsteil lösen D
MSBV Installation Instructions TOOLS REQUIRED FOR INSTALLATION PARTS Bag A A (8) M4 x 12mm B (8) M4 x 25mm Bag B C (8) M5 x 12mm D (8) M5 x 25mm E (8) M5 x 30mm F (8) M5 x 45mm P (1) [MSBV bracket] Bag C G (8) M6 x 12mm Q (4) [.242 mounting button] J (8) M6 x 30mm K (8) M6 x 45mm Bag D L (8) .750x.344x.
Installation Instructions MSBV Guidelines for Using Spacers (if required) INSTALLATION If the display has a recessed mounting surface, protrusions or a power box, a spacer must be placed between the display and MSBV bracket (A) and longer mounting hardware must be used. (See Figure 1) WARNING: IMPROPER INSTALLATION CAN LEAD TO DISPLAY FALLING CAUSING SERIOUS PERSONAL INJURY OR DAMAGE TO EQUIPMENT! Using screws of improper size may damage your display.
MSBV Installation Instructions 300 x 100mm Pattern 1. 2. 3. 400 x 200mm Pattern Select eight properly sized M4 screws from Bag A. Attach the MSBV bracket (A) using the hole pattern on back of display and holes noted at "X". (See Figure ) To prevent equipment damage, do not over-tighten the screws into the display. 1. 2. 3. Attach MSBV using fasteners at "X" Select six M5 or M6 screws from Bag B or Bag C. Attach the MSBV bracket (A) using the hole pattern on back of display and holes noted at "X".
Installation Instructions 3. MSBV If 200 x 200mm hole pattern is shifted high on the screen, attach the MSBV bracket (A) vertically with four M5 or M6 screws (Bag B or Bag C). (See Figure 8) Attach MSBV using fasteners at "X" X X X X Figure 8 INSTALLING DISPLAY TO MOUNT 1. Install display to UL Listed Chief mount following instructions included with the mount.
MSBV Installation Instructions USA/International Europe 8800-002592 Rev03 2021 Legrand | AV www.legrandav.com 07/2021 Asia Pacific A P F A P F A 6436 City West Parkway, Eden Prairie, MN 55344 800.582.6480 / 952.225.6000 877.894.6918 / 952.894.6918 Franklinstraat 14, 6003 DK Weert, Netherlands +31 (0) 495 580 852 +31 (0) 495 580 845 Office No.
