INSTALLATION INSTRUCTIONS Instrucciones de instalación Installationsanleitung Instruções de Instalação KTC-220 Istruzioni di installazione Installatie-instructies Instructions d´installation KTC-225 KTC-320 KTC-230 KTC-325 KTC-330 KTC-440 KTC-445 Horizontal and Vertical Desk Clamp Stands Spanish Product Description German Product Description Portuguese Product Description Italian Product Description Dutch Product Description French Product Description KTC SERIES
KTC SERIES Installation Instructions DISCLAIMER Milestone AV Technologies and its affiliated corporations and subsidiaries (collectively “Milestone”), intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use of this product.
Installation Instructions KTC SERIES DIMENSIONS 13.68 347.4 KTC-220 2.25 57.2 3.63 92.1 5.88 149.2 23.83 605.4 1.96 49.8 1.90 48.3 13.25 336.6 .25 6.4 3.75 95.3 .50 [12.7] MIN 3.00 [76.2] MAX 2.75 69.9 17.24 437.8 3.63 92.1 2.25 57.2 KTC-225 6.87 174.6 30.51 774.8 1.96 49.8 1.90 48.3 13.25 336.6 .25 6.4 3.75 95.3 .50 [12.7] MIN 3.00 [76.2] MAX 2.75 69.
KTC SERIES Installation Instructions DIMENSIONS - CONTINUED 3.63 92.1 3.26 82.7 KTC-230 2.25 57.2 5.50 139.6 1.90 29.75 755.6 .25 3.75 95.3 .50 [12.7] MIN 3.00 [76.2] MAX 2.75 69.9 KTC-320 3.63 92.1 20.80 528.3 2.25 57.2 8.13 206.5 37.14 943.3 1.96 49.8 1.90 48.3 13.25 336.6 .25 6.4 3.75 95.3 .50 [12.7] MIN 3.00 [76.2] MAX 2.75 69.
Installation Instructions KTC SERIES DIMENSIONS - CONTINUED KTC-325 3.63 92.1 26.90 683.4 2.25 57.2 10.51 [267.0] 47.70 [1211.6] 1.96 49.8 13.25 336.6 1.90 48.3 .25 6.4 3.75 95.3 .50 [12.7] MIN 3.00 [76.2] MAX 2.75 69.9 KTC-330 20.80 528.3 3.63 92.1 2.25 57.2 8.13 206.5 37.14 943.3 1.96 49.8 27.25 692.2 .25 6.4 1.90 48.3 3.75 95.3 .50 [12.7] MIN 3.00 [76.2] MAX 2.75 69.
KTC SERIES Installation Instructions DIMENSIONS - CONTINUED KTC-440 13.68 347.4 3.63 92.1 2.25 57.2 5.88 149.2 23.83 605.4 1.96 49.8 27.25 692.2 .25 6.4 3.75 95.3 .50 [12.7] MIN 3.00 [76.2] MAX 2.75 69.9 KTC-445 17.24 437.8 3.63 92.1 2.25 57.2 6.87 174.6 30.51 774.8 1.96 49.8 27.25 692.2 .25 6.4 3.75 95.3 6 .50 [12.7] MIN 3.00 [76.2] MAX 2.75 69.
Installation Instructions KTC SERIES LEGEND Tighten Fastener Pencil Mark Apretar elemento de fijación Marcar con lápiz Befestigungsteil festziehen Stiftmarkierung Apertar fixador Marcar com lápis Serrare il fissaggio Segno a matita Bevestiging vastdraaien Potloodmerkteken Serrez les fixations Marquage au crayon Loosen Fastener Drill Hole Aflojar elemento de fijación Perforar Befestigungsteil lösen Bohrloch Desapertar fixador Fazer furo Allentare il fissaggio Praticare un foro Beves
KTC SERIES Installation Instructions Table 1: Monitor Limits MONITOR LIMITS By MODEL DESCRIPTION 220 225 230 320 325 330 440 445 Weight 35 lbs 35 lbs 35 lbs 20 lbs 15 lbs. 15 lbs 20 lbs 15 lbs Max Screen Width 22.7" 30" N/A 18" 24.5" 18" 22.7" 30" Max Screen Height 28" 28" 19.3" 28" 28" 18.5" 18.5" 18.
Installation Instructions KTC SERIES TOOLS REQUIRED FOR INSTALLATION 5/32” (included) #2 3/16” (included with 230 model only) 7/32” (included) PARTS (REFER TO TABLE 2 FOR QUANTITIES) C B [Triple array assembly] A [Pole mount assembly] [Dual array assembly] E 8" D [Desk clamp] K 3/16” J 7/32” H L 5/32” [Bumper] Q P M4 X 12 U 1/4-20 x 3/4” G 28" F 14" R M4 X 30 M [2" pipe clamp] S 3/4” N [Back casting clamp] T 3/8” M4 X 20 V 1/4-20 x 1 1/4” W 3/8-16 x 1" X 1/4” Y [Pipe cap]
KTC SERIES Installation Instructions INSTALLATION Desk Clamp Installation NOTE: In order to reduce the chance of scratching to the mounting surface, bumpers may be installed. However, installation of bumpers is optional. 1. Remove adhesive from underside of bumpers (H). 2. Attach bumpers (H) to underside of desk clamp (D). (See Figure 1) 6 7 (D) 2 5 (H) x 6 (behind desk) 3 (W) x 1 Figure 2 8. Turn clamp screw until the clamp is secured to the desk as tightly as possible.
Installation Instructions KTC SERIES Mount Assembly KTC-220, 225, 320, 325, 330, 440 and 445 Assembly KTC-230 Assembly 1. Assemble pole clamp back (M) to pole mount front using two washers (X) and two 1/4-20 x 3/4” button head cap screws (U) using a 5/32” hex key (J). (See Figure 6) 1. Place front pole clamp with Centris Head (C) against pole (G) in approximate mounting location. 2. 2.
KTC SERIES Installation Instructions Attach Centris Head to Recessed Mount Display 1 NOTE: Refer to Table 1 to select the applicable screw and (P) x 2 spacer combination. 1. Uninstall end lock using the 5/32” hex key (J). (See Figure 10) 2. Slide Centris head off array rail. (See Figure 11) Centris Head Square Nut Display 1 Figure 7 Array Rail End Lock Figure 10 Display 2 Array Rail 2 Array Rail Centris Head Centris Head Figure 8 Figure 11 Display 3.
Installation Instructions KTC SERIES Array Rail 6 (Q or R) x 4 End Lock Centris Head 5 4 (S or T) x 4 End Lock Retaining Screw Centris Head Figure 14 Display ADJUSTMENTS Display Adjustment Figure 12 7. Slide display with Centris bracket onto array rail. (See Figure 13) NOTE: Repeat previous steps for each additional display. 8. Reinstall end locks into mounting rail using the 5/32” hex key (J) (See Figure 14).
KTC SERIES Installation Instructions Display Pitch and Roll Adjustment To adjust display pitch or roll position: 1. Loosen Centris bracket front adjustment knob. (See Figure 16) 2. Tilt display up or down, or adjust display roll left or right until properly positioned. 3. Tighten Centris bracket front adjustment knob. Pitch/Roll Adjustment Knob Figure 16 CABLE MANAGEMENT The KTC Series mount includes cable management features used to properly route and secure display cables.
Installation Instructions KTC SERIES 15
KTC SERIES Installation Instructions USA/International Europe Chief Manufacturing, a products division of Milestone AV Technologies 8800-002425Rev 00 2013 Milestone AV Technologies, a Duchossois Group Company www.chiefmfg.com 05/13 Asia Pacific A P F A P F A 6436 City West Parkway, Eden Prairie, MN 55344 800.582.6480 / 952.225.6000 877.894.6918 / 952.894.6918 Franklinstraat 14, 6003 DK Weert, Netherlands +31 (0) 495 580 852 +31 (0) 495 580 845 Office No.
