INSTALLATION INSTRUCTIONS Instrucciones de instalación Installationsanleitung Instruções de Instalação Istruzioni di installazione Installatie-instructies Instructions d´installation Turntite Centris Head Accessory Spanish Product Description German Product Description Portuguese Product Description Italian Product Description Dutch Product Description French Product Description KSA1019
KSA1019 Installation Instructions DISCLAIMER CSAV, Inc., and its affiliated corporations and subsidiaries (collectively, "CSAV"), intend to make this manual accurate and complete. However, CSAV makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use of this product. The information contained in this document is subject to change without notice or obligation of any kind.
Installation Instructions KSA1019 LEGEND Tighten Fastener Adjust Apretar elemento de fijación Ajustar Befestigungsteil festziehen Einstellen Apertar fixador Ajustar Serrare il fissaggio Regolare Bevestiging vastdraaien Afstellen Serrez les fixations Ajuster Loosen Fastener Hex-Head Wrench Aflojar elemento de fijación Llave de cabeza hexagonal Befestigungsteil lösen Sechskantschlüssel Desapertar fixador Chave de cabeça sextavada Allentare il fissaggio Chiave esagonale Bevestiging lo
KSA1019 Installation Instructions TOOLS REQUIRED FOR INSTALLATION 3/16" (Provided) #2 PARTS A (1) B (4) - M4 X 12mm E (4) - .5 x .194 x .375 C (4) - M4 x 20mm F (4) - .5 x .194 x .
Installation Instructions KSA1019 INSTALLATION x1 WARNING: IMPROPER INSTALLATION CAN LEAD TO DISPLAY FALLING CAUSING SERIOUS PERSONAL INJURY OR DAMAGE TO EQUIPMENT! DO NOT substitute hardware! Use only hardware provided by manufacturer.
KSA1019 Installation Instructions CAUTION: IMPROPER INSTALLATION CAN LEAD TO DISPLAY FALLING CAUSING SERIOUS PERSONAL INJURY OR DAMAGE TO EQUIPMENT! Using screws of improper size may damage your display! Proper screws will easily and completely thread into display mounting holes. 6. Using Phillips screwdriver, install four Phillips screws (C or D) through the mounting holes in Centris Turntite head and the spacers (E or F), into display (See Figure 5). Tighten all four screws.
Installation Instructions KSA1019 To adjust display pivot tension: 1. Using hex wrench provided (G), turn adjustment screw clockwise to increase tension or counter-clockwise to decrease tension.
KSA1019 Installation Instructions USA/International Europe Asia Pacific 8815-000001 ©2007 Chief Manufacturing www.chiefmfg.com 09/07 A P F A P F A 8401 Eagle Creek Parkway, Savage, MN 55378 800.582.6480 / 952.894.6280 877.894.6918 / 952.894.6918 Fellenoord 130 5611 ZB EINDHOVEN, The Netherlands +31 (0)40 2668620 +31 (0)40 2668615 Room 30I, Block D, Lily YinDu International Building LuoGang, BuJi Town, Shenzhen, CHINA.
