INSTALLATION INSTRUCTIONS Instrucciones de instalación Installationsanleitung Instruções de Instalação Istruzioni di installazione Installatie-instructies Instructions d´installation Height-adjustable Dual Monitor Pole Mount Spanish Product Description German Product Description Portuguese Product Description Italian Product Description Dutch Product Description French Product Description KPY220
KPY220 Installation Instructions DISCLAIMER Milestone AV Technologies, Inc., and its affiliated corporations and subsidiaries, intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use of this product.
Installation Instructions KPY220 LEGEND Tighten Fastener Pencil Mark Apretar elemento de fijación Marcar con lápiz Befestigungsteil festziehen Stiftmarkierung Apertar fixador Marcar com lápis Serrare il fissaggio Segno a matita Bevestiging vastdraaien Potloodmerkteken Serrez les fixations Marquage au crayon Loosen Fastener Drill Hole Aflojar elemento de fijación Perforar Befestigungsteil lösen Bohrloch Desapertar fixador Fazer furo Allentare il fissaggio Praticare un foro Bevestigi
Installation Instructions KPY220 TOOLS REQUIRED FOR INSTALLATION 1/4" #2 PARTS B (1) [Y-adapter pole clamp] A (2) [Height-adjustable arm] D (2) [cable management cover] H (2) 5/16-18 x 4" M (8) M4x30mm T (4) 5/16" steel E (2) [pivot pin] J (3) 1/4-20 x 1 1/4" N (8) M4x20mm U (2) 5/16" plastic P (8) M4x12mm V (1) 3/16" C (1) [pole clamp back] G (2) F (2) [plastic spacer] [lock washer] K (4) #8-32 x 3/8" Q (8) .5x.194x.375 W (1) 5/32" L (2) 5/16-18" R (8) .5x.194x.
Installation Instructions KPY220 INSTALLATION DUAL ARM ASSEMBLY INSTALLATION TO POLE BASIC ASSEMBLY 1. Determine approximate location for mount keeping in mind display size, extension, height adjustment, and pitch/roll requirements. 1. 2. Place Y-adapter pole clamp (B) against pole, with pole clamp back (C) on opposite side of pole. (See Figure 1) (H) Using 5/32" hex key, loosely assemble with three 1/4-20x 1 1/4" button head cap screws (J). (See Figure 1) (T) 3.
KPY220 Installation Instructions DO NOT POSITION EITHER ARM ASSEMBLY IN GRAY SHADED AREA ALLOWABLE AREA 2. Lift outer arm from pin (with screw and washers) and place on protective surface. 3. Remove spacer (F) from pin (See Figure 5). 4. Install lock washer (G) on pin (See Figure 5). 5. Re-install outer arm (with screw and washers) on pin (See Figure 5). 6. Insert and hold nut in lower bore of inner arm (See Figure 5). 7. Tighten screw as required using 3/16" hex key (See Figure 5). 8.
Installation Instructions KPY220 5. (P) x 2 6. 2 Place the four spacers (Q or R) over each mounting hole on the back of display. (See Figure 8) Orient mount so that mounting holes in the Centris cup are aligned with the holes in the spacers (Q or R); rotate the Centris cup as required (See Figure 8).
KPY220 Installation Instructions CABLE MANAGEMENT installation of cover (D) or screws (K). 1. Attach all cables to display. 5. Carefully insert cables in cavity located in lower portion of static mount arm (See Figure 11). 2. Open the cable management bracket by sliding it towards the edge of the arm (See Figure 9). 6. Using Phillips screwdriver, install cover (D) with two #8-32 x 3/8" screws (K).
Installation Instructions KPY220 HEIGHT ADJUSTABLE (IF APPLICABLE) IMPORTANT ! : It is important that the mount be attached to the mounting surface AND display be attached to the mount BEFORE attempting to adjust the height adjustable arm. 1. Using 5/32" hex key, slightly loosen or tighten the adjustment screw as necessary (See Figure 13). • • If display settles on its own, then rotate adjustment screw counterclockwise (towards the "+" symbol).
KPY220 10 Installation Instructions
Installation Instructions KPY220 11
KPY220 Installation Instructions USA/International Europe Chief Manufacturing, a products division of Milestone AV Technologies 8832-002035 Rev00 2010 Milestone AV Technologies, a Duchossois Group Company www.chiefmfg.com 07/10 Asia Pacific A P F A P F A 8401 Eagle Creek Parkway, Savage, MN 55378 800.582.6480 / 952.894.6280 877.894.6918 / 952.894.6918 Fellenoord 130 5611 ZB EINDHOVEN, The Netherlands +31 (0)40 2668620 +31 (0)40 2668615 Office No.
