INSTALLATION INSTRUCTIONS Instrucciones de instalación Installationsanleitung Instruções de Instalação Istruzioni di installazione Installatie-instructies Instructions d´installation K4S120 K4S210 K4S310 Kontour™ Articulating Array Arm Slat Wall Mounts Spanish Product Description German Product Description Portuguese Product Description Italian Product Description Dutch Product Description French Product Description K4S120-210-310
K4S120-210-310 Installation Instructions DISCLAIMER Milestone AV Technologies and its affiliated corporations and subsidiaries (collectively “Milestone”), intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use of this product.
Installation Instructions K4S120-210-310 DIMENSIONS K4S120 21.0 12.0 EXTENSION MINIMUM VESA 100 X 100, 75 X 75 COMPATIBLE INTERFACE 16.00 6.5 5.4 K4S210 26.1 12.0 EXTENSION MINIMUM VESA 100 X 100, 75 X 75 COMPATIBLE INTERFACE 12 TILT ADJUSTMENT 8.2 6.5 5.4 40.
K4S120-210-310 Installation Instructions DIMENSIONS (CONTINUED) K4S310 26.8 12.0 EXTENSION MINIMUM VESA 100 X 100, 75 X 75 COMPATIBLE INTERFACE 12 TILT ADJUSTMENT 8.2 6.5 5.4 51.
K4S120-210-310 Installation Instructions LEGEND 5 Tighten Fastener Pencil Mark Apretar elemento de fijación Marcar con lápiz Befestigungsteil festziehen Stiftmarkierung Apertar fixador Marcar com lápis Serrare il fissaggio Segno a matita Bevestiging vastdraaien Potloodmerkteken Serrez les fixations Marquage au crayon Loosen Fastener Drill Hole Aflojar elemento de fijación Perforar Befestigungsteil lösen Bohrloch Desapertar fixador Fazer furo Allentare il fissaggio Praticare un for
K4S120-210-310 Installation Instructions TOOLS REQUIRED FOR INSTALLATION #2 3/16” (included) 1/8” (included) 5/32” (included with K4S210 and K4S310) PARTS B (2-K4S210/310 , 4-K4S120) #10-32 x 5/16” A (1) [Column arm] C (2) #10-32 x 1” (K4S210/310 ONLY) D (4) [4 1/2” cable cover] (K4S210/310 ONLY) F (2-K4S120/K4S210, 3-K4S310) - Display Mounting Hardware - quantities per pack F1 (4) M4x30mm E (1) [Handle] (K4S210/310 ONLY) F3 (4) M4x12mm F2 (4) M4x20mm or or G (1) [K4S210 array] F4 (4) 3/8”
Installation Instructions K4S120-210-310 Assembly And Installation 6. 1. Determine mounting location. 2. Hang wall bracket of mounting arm (A) onto slat wall at desired mounting location by inserting the upper mounting plate into wall track. (See Figure 1) 3. Let lower mounting plate rest against slat wall. Hang array arm (G) onto column arm faceplate using the mounting tab on the faceplates. (See Figure 3) (K4S210 shown) (G) wall bracket 6 2 mounting tab 3 faceplate Figure 1 Figure 3 4.
K4S120-210-310 8. Installation Instructions Use two #10-32 x 1" button head cap screws (C) to secure two handle (E) to array arm (G). (See Figure 5) Display Installation NOTE: Keep in mind the size of the display when selecting WARNING: Exceeding the weight capacity can result in which holes to use to attach the handles.
Installation Instructions 4. K4S120-210-310 Using Phillips screwdriver, install two M4x12 mm Phillips pan machine screws (F3) through the lower mounting holes on faceplate into the display. (See Figure 8) 4. Pick up and align display so that screws (F1 or F2) (installed on the back of the display in the previous step) fit into the mounting holes on the faceplate. Lower the display firmly into place.
K4S120-210-310 Installation Instructions Adjustments Faceplate Assembly Removal Pivot Adjustment (Column Arm) 1. Use handle (G) to extend or collapse column arms as desired. (See Figure 11) 2. Remove upper wall bracket cover (H) to expose one of three pivot tension screws. (See Figure 11) 3. (Optional) Loosen or tighten column arm pivot tension screws as desired to increase or decrease pivot tension. (See Figure 11) 1. Remove socket head cap screw from bottom of faceplate assembly.
Installation Instructions K4S120-210-310 Lateral Shift Cable Management 1. Loosen knob on top of faceplate assembly until faceplate can slide freely along array. (See Figure 14) 1. 2. Adjust lateral position as desired. (See Figure 14) 3. Tighten knob to secure lateral position. (See Figure 14) (K4S310 shown) 1 (K4S210 and K4S310 ONLY) Install two 4 1/2” cable covers (D) to array arms. (See Figure 16) (K4S310 shown) 1 (D) x 4 3 2 2 2 Figure 16 Figure 14 Pitch/Roll/Yaw Adjustment 1.
K4S120-210-310 Installation Instructions USA/International Europe Chief, a products division of Milestone AV Technologies 8800-002608 Rev01 2014 Milestone AV Technologies www.chiefmfg.com 08/14 Asia Pacific A P F A P F A 6436 City West Parkway, Eden Prairie, MN 55344 800.582.6480 / 952.225.6000 877.894.6918 / 952.894.6918 Franklinstraat 14, 6003 DK Weert, Netherlands +31 (0) 495 580 852 +31 (0) 495 580 845 Office No.
