INSTALLATION INSTRUCTIONS Instrucciones de instalación Installationsanleitung Instruções de Instalação K4G220 Istruzioni di installazione Installatie-instructies Instructions d´installation K4G320 Kontour™ Articulating Array Arm Grommet Mounts Spanish Product Description German Product Description Portuguese Product Description Italian Product Description Dutch Product Description French Product Description K4G220-320
K4G220-320 Installation Instructions DISCLAIMER Milestone AV Technologies and its affiliated corporations and subsidiaries (collectively “Milestone”), intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use of this product.
Installation Instructions K4G220-320 DIMENSIONS K4G220 40.4 3.2 11.5 12.0 EXTENSION MINIMUM 43.6 MAX MONITOR HEIGHT 38.8 COMPATIBLE INTERFACE 12 TILT ADJUSTMENT 1.0 7.7 5.0 MAX SURFACE DEPTH 7.1 K4G320 51.8 3.2 12.5 12.0 EXTENSION MINIMUM 43.6 MAX MONITOR 38.8 HEIGHT 12 TILT ADJUSTMENT 7.7 5.0 MAX SURFACE DEPTH 7.
K4G220-320 Installation Instructions LEGEND 4 Tighten Fastener Pencil Mark Apretar elemento de fijación Marcar con lápiz Befestigungsteil festziehen Stiftmarkierung Apertar fixador Marcar com lápis Serrare il fissaggio Segno a matita Bevestiging vastdraaien Potloodmerkteken Serrez les fixations Marquage au crayon Loosen Fastener Drill Hole Aflojar elemento de fijación Perforar Befestigungsteil lösen Bohrloch Desapertar fixador Fazer furo Allentare il fissaggio Praticare un foro B
K4G220-320 Installation Instructions TOOLS REQUIRED FOR INSTALLATION 1/2” 5/16” (included) 3/16” (included) 5/32” (included) 1/8” (included) 3/32” (included) 7/32” (included) #2 PARTS A (4) #10-32 x 5/16” C (4) B(4) #10-32 x 1” 1/4-20 x 1 1/4” D (1) [Column cap] E (1) [Base cover] F (4-K4G220, 6-K4G320) - Display Mounting Hardware - quantities per pack F2 (4) M4x20mm F1 (4) M4x30mm F3 (4) M4x12mm F4 (4) 3/8” F5 (4) 3/4” G (2) [Handle] H (1) [Column arm] J (1) [Grommet screw and base] P (1)
K4G220-320 Installation Instructions Assembly And Installation 1. Use four 1/4-20 x 1 1/4” flat head cap screws (C) to secure grommet plate (K) to column arm (H). Make sure longer legs of grommet plate are aligned with the front of column. (See Figure 1) 7. Carefully manipulate base cover (E) to create an opening large enough to wrap cover around array column. (See Figure 3) 8. Wrap base cover (E) around column and slide it down until base cover fits securely onto grommet plate (K).
Installation Instructions K4G220-320 11. Hang two array arms (X) onto column arm faceplates using the mounting tab on the faceplates. (See Figure 5) (K4G320 shown) 13. Use four #10-32 x 1" button head cap screws (B) to secure two handles (G) to array arms (X). (See Figure 7) NOTE: Keep in mind the size of the display when selecting (X) x 2 which holes to use to attach the handles. (K4G320 shown) 11 (G) x 2 mounting tab 11 (X) x 2) faceplate Figure 5 12.
K4G220-320 Installation Instructions Display Installation WARNING: Exceeding the weight capacity can result in serious personal injury or damage to equipment! It is the installer’s responsibility to make sure the combined weight of all components located on the K4G220-320 mounts up to (and including) the display does not exceed 15 lbs (6.8 kg) per display. CAUTION: Using screws of improper size may damage your display! Proper screws will easily thread into display mounting holes.
Installation Instructions K4G220-320 Adjustments (F1 or F2) x 2 3 Pivot Adjustment (Column Arm) 1. Use handles (G) to extend or collapse column arms as desired. (See Figure 12) 2. (Optional) Loosen or tighten column arm pivot tension screws as desired to increase or decrease pivot tension. (See Figure 12) (F4 or F5) x 2 arms extended (K4G320 shown) 4 (G) x 2 faceplate (array arm not shown for clarity) Figure 10 5.
K4G220-320 Installation Instructions Height Adjustment To Reattach Faceplate Assembly 1. Loosen socket head cap screws holding column arm to column. (See Figure 13) 4. Place faceplate assembly on array arm at desired mounting position. (See Figure 15) 2. Adjust column arm to desired height. (See Figure 13) 5. 3. Tighten socket head cap screws to lock column arm’s position. (See Figure 13) Slide removable plate back into slot at bottom of faceplate assembly. (See Figure 15) 6.
Installation Instructions K4G220-320 Pitch/Roll/Yaw Adjustment 1. Loosen knob on top of faceplate assembly. (See Figure 17) 2. Adjust pitch, roll and/or yaw as desired. (See Figure 17) 3. Tighten knob to secure desired faceplate position. (See Figure 17) 1 3 3. Route cables from display through cable management covers (M) on array arms as desired. (See Figure 19) 4. Route cables along swing arms, using cable ties (W) to secure cables to arms. (See Figure 19) 5.
K4G220-320 Installation Instructions USA/International Europe Chief, a products division of Milestone AV Technologies 8800-002431 Rev00 2014 Milestone AV Technologies www.chiefmfg.com 04/14 Asia Pacific A P F A P F A 6436 City West Parkway, Eden Prairie, MN 55344 800.582.6480 / 952.225.6000 877.894.6918 / 952.894.6918 Franklinstraat 14, 6003 DK Weert, Netherlands +31 (0) 495 580 852 +31 (0) 495 580 845 Office No.
