Installation instructions

Installation Instructions K2C Series

Adjustments

Portrait Adjustment (K2C22H Models only)

1. The monitor may be adjusted 90 degrees in either direction

in order to provide a portrait view of the monitor. (See Figure

19)

2. Use 3/16” hex key (P) to adjust rotational adjustment screw

to adjust rotational tension. (See Figure 19)

Figure 19

Column Height Adjustment

1. Loosen column adjustment knob. (See Figure 20)

2. Adjust height to desired level. (See Figure 20)

3. Tighten column adjustment knob. (See Figure 20)

Figure 20

Adjustments - K2C22H models only

1. Loosen knobs securing faceplates to array. (See Figure 21)

2. Slide displays laterally on array to adjust lateral shift. (See

Figure 21)

3. Adjust pitch and pivot position as desired. (See Figure 21)

4. Tighten knobs to secure faceplates in position. (See Figure

21)

Figure 21

Array Bar Roll Adjustment

1. Loosen roll adjustment screws on back of array bracket.

(See Figure 22)

2. Adjust roll of array bar as desired. (See Figure 22)

3. Tighten roll adjustment screws on back of array bracket.

(See Figure 22)

Figure 22

portrait tension

1 4