Installation instructions

Model: FSB-V Installation Instructions
4
Installation For Mounts Equipped With Centris
Cup Technology
CAUTION: IMPROPER INSTALLATION CAN LEAD
TO DISPLAY FALLING! Use only hardware provided
and referenced within these instructions. DO NOT
substitute!
VESA® 200mm x 100mm Flush Mount Display
Installation
IMPORTANT ! : If the display being mounted has a
VESA® compliant mounting pattern of 75mm x 75mm or
100mm x 100mm follow the installation instructions
provided with the mount.
If the display being mounted has a 200mm x 100mm
VESA® :
1. Place display face down on a clean dry surface
2. Assemble interface bracket (10) to display using six
M4 x 12mm Phillips flat head screws (30). (See
Figure 5)
Figure 5: Interface Installation, (Flush Mount)
3. Align and place six spacers (110 or 120) over
mounting holes in display back. (See Figure 6)
4. Align and place interface bracket (10) over six
spacers (110 or 120). (See Figure 6)
5. Secure interface assembly to display back using six
M4 x 20mm (40) or six M4 x 25mm (50) Phillips flat
head screws. (See Figure 6)
Figure 6: Interface Installation, (Recessed Mount)
6. Assemble two M4 x 20mm Phillips pan head upper
mounting screws (80) into interface bracket. (See
Figure 7)
Figure 7: Install Centris Mounting Screws
Back of Display
10
30
(6 places)
Back of Display
40 or 50
(6 places)
(6 places)
110 or 120
10
Back of Display
10
(Mounted on Display)
80