Specifications

Installation Instructions Model: FSA-1015
3
TOOLS REQUIRED FOR INSTALLATION
• #2 Phillips Screwdriver
• 7/16" Wrench (for installation of existing FWD
Wall Mount)
NOTE: Other tools may be required depending on your
method of installation.
PARTS
After unpacking carton, inspect and verify contents (See
Figure 1). If any listed parts are missing or damaged,
contact Chief Customer Service at 1-800-582-6480.
Figure 1: Parts
Table 1: Parts
Item Description Qty
10 BRACKET, Display Mounting 1
20 BRACKET, Side 2
30 SCREW, Phillips Pan Machine, #10-32 x 1/2" 4
40 SCREW, Phillips Pan Machine, #12-24 x 1/2" 4
50 SCREW, Phillips Pan Machine, #10-24 x 1/2" 8
60 SCREW, Phillips Pan Machine, #10-24 x 1-1/4" 2
70 NUT, Nylock, Short, #10-24 4
80 BRACKET, FWD Wall Mount 1
90 SCREW, Phillips Pan Machine, M4 x 12mm 6
100 SCREW, Phillips Pan Machine, M4 x 20mm 6
110 SCREW, Phillips Pan Machine, M4 x 30mm 6
120 SPACER, Nylon, 3/8" 6
130 SPACER, Nylon, 3/4" 6
10
20
30
40
60
70
80
100
50
90
110
120
BAG "A"
BAG "B"
BAG "C"
BAG "D"
130