INSTALLATION INSTRUCTIONS Above Cart/Ceiling Above Wall (FCA811 shown) Below Cart/Ceiling Below Wall Fusion™ Above/Below Accessory Shelf Spanish Product Description German Product Description Portuguese Product Description Italian Product Description Dutch Product Description French Product Description FCA810/811
FCA810/811 DISCLAIMER Milestone AV Technologies and its affiliated corporations and subsidiaries (collectively “Milestone”), intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use of this product. The information contained in this document is subject to change without notice or obligation of any kind.
Installation Instructions FCA810/811 DIMENSIONS - FCA810 FUSION WALL BELOW MOUNT SETUP 18.0-19.7 19.7-29.5 [499.1-750.3] INTERMEDIATE RANGE 29.5-30.9 [750.3-784.9] MAX RANGE (*)NOTES: • TYPICAL FUSION INTERFACES ARE 0.5" [12.7] DEEP FUSION WALL ABOVE MOUNT SETUP 36.4 924.9 OVERALL MAX 23.4 594.7 OVERALL MIN 19.5-29.4 [494.0-745.0] INTERMEDIATE RANGE 17.8-19.5 [452.1-494.0] MIN RANGE (*)NOTES: • TYPICAL FUSION INTERFACES ARE 0.5" [12.
FCA810/811 Installation Instructions DIMENSIONS - FCA810 (CONTINUED) FUSION CEILING/CART BELOW MOUNT SETUP 23.1 587.5 OVERALL MIN 36.3 923.3 OVERALL MAX 27.8-31.1 [704.9-790.4] MAX RANGE (*)NOTES: • • • TYPICAL SINGLE DISPLAY MODELS HAVE INTERFACE DEPTHS .5" [12.7] TYPICAL DUAL DISPLAY MODELS HAVE INTERFACE DEPTHS 1.9" [48.3] FCA623 DUAL MONITOR INTERFACES ARE 1.4" DEEP [35.6] FUSION CEILING/CART ABOVE MOUNT SETUP 27.6-30.8 18.0-19.4 [456.7-492.
Installation Instructions FCA810/811 DIMENSIONS - FCA811 FUSION WALL BELOW MOUNT SETUP 18.0-19.7 19.7-29.5 [499.1-750.3] INTERMEDIATE RANGE 29.5-30.9 [750.3-784.9] MAX RANGE (*)NOTES: • TYPICAL FUSION INTERFACES ARE 0.5" [12.7] DEEP FUSION WALL ABOVE MOUNT SETUP 36.4 924.9 OVERALL MAX 19.5-29.4 [494.0-745.0] INTERMEDIATE RANGE 17.8-19.5 [452.1-494.0] MIN RANGE (*)NOTES: • TYPICAL FUSION INTERFACES ARE 0.5" [12.
FCA810/811 Installation Instructions DIMENSIONS - FCA811 (CONTINUED) FUSION CEILING/CART BELOW MOUNT SETUP 23.1 587.5 OVERALL MIN 36.3 923.3 OVERALL MAX 27.8-31.1 [704.9-790.4] MAX RANGE (*)NOTES: • • • TYPICAL SINGLE DISPLAY MODELS HAVE INTERFACE DEPTHS .5" [12.7] TYPICAL DUAL DISPLAY MODELS HAVE INTERFACE DEPTHS 1.9" [48.3] FCA623 DUAL MONITOR INTERFACES ARE 1.4" DEEP [35.6] FUSION CEILING/CART ABOVE MOUNT SETUP 27.6-30.8 18.0-19.4 [456.7-492.
Installation Instructions FCA810/811 LEGEND Tighten Fastener Phillips Screwdriver Apretar elemento de fijación Destornillador Phillips Befestigungsteil festziehen Kreuzschlitzschraubendreher Apertar fixador Chave de fendas Phillips Serrare il fissaggio Cacciavite a stella Bevestiging vastdraaien Kruiskopschroevendraaier Serrez les fixations Tournevis à pointe cruciforme Loosen Fastener Open-Ended Wrench Aflojar elemento de fijación Llave de boca Befestigungsteil lösen Gabelschlüssel De
FCA810/811 Installation Instructions ASSEMBLY AND INSTALLATION (Below Cart/Ceiling) Below Installation (FCA811 shown) NOTE: FCA810 and FCA811 shelves may be installed above or below displays. To install above display, proceed to “Above Installation” Section. 2 (A) (L) x 2 Assembling Shelf to Upright Bracket 1. Attach shelf (E) to shelf support (D) using two #10-24 x 3/4” Phillips flat head machine screws (K).
Installation Instructions 3. 4. FCA810/811 Slide second shelf bracket (C) underneath lower rail on wall mount, lining up holes on shelf bracket (C) to main bracket (B). (See Figure 5) Use two 1/4-20 x 1/4” button head cap screws (M) and two large washers (H) to secure shelf bracket (C) to main bracket (B). (See Figure 5) (Below wall - maximum) (B) (FCA811 shown) (J) (V) (Below wall) wall mount rails 5 4 (G) x 2 6 (H) x 2 (P) (A) (M) x 2 3 Figure 6 7.
FCA810/811 Installation Instructions Attaching Shelf to Cart/Ceiling Mount Installing to FCA623 Accessory IMPORTANT ! : If installing to a 2x1 display cart using the FCA623 accessory, proceed to “Installing to FCA623 Accessory” Section (Step 6). IMPORTANT ! : Steps 6-10 only apply if installing to FCA623 accessory. 1. Use two 1/4-20 x 1/4” button head cap screws (M) and two large washers (H) to secure shelf bracket (C) to main bracket (B). (See Figure 8) 2.
Installation Instructions FCA810/811 NOTE: Refer to Table 2 and dimension drawings on pages 36 to determine the extension level based on extension distance from mount center. Table 2: Below Cart/Ceiling Mount Extension distance from center of mount (in.) 13. (For minimum extension) Slide upright bracket behind main bracket. (See Figure 13) 14. (For minimum extension) Use 1/4-20 x 5/8” hex head flange bolt (N) and center washer (F) to secure upright bracket (A) to main bracket (B).
FCA810/811 Installation Instructions Above Installation Attaching Shelf to Wall Mount Assembling Shelf to Upright Bracket 1. 1. Install two 1/4-20 x 1/2” button head cap screws (L) into lowest holes on upright bracket (A). (See Figure 14) or (See Figure 15) 2. Hang shelf (E) onto two screws installed in Step 1. (See Figure 14) or (See Figure 15) 3. Secure upright bracket (A) to shelf (E) using: • • 4.
Installation Instructions FCA810/811 NOTE: Refer to Table 3 and dimension drawings on pages 36 to determine the extension level based on extension distance from mount center. Table 3: Above Wall Mount Attaching Shelf to Cart/Ceiling Mount IMPORTANT ! : If installing to a 2x1 display cart using the FCA623 accessory, proceed to “Installing to FCA623 Accessory” Section (Step 6). 1. Use two 1/4-20 x 1/4” button head cap screws (M) and two large washers (H) to secure shelf bracket (C) to main bracket (B).
FCA810/811 Installation Instructions NOTE: Refer to Table 4 and dimension drawings on pages 3- Installing to FCA623 Accessory 6 to determine the extension level based on extension distance from mount center. NOTE: Steps 6-10 only apply if installing to FCA623 accessory. 6. 7. Use two 1/4-20 x 7/16” button head cap screws (R), two large washers (H) and two 1/2” spacers (U) to secure shelf bracket (C) to main bracket (B).
Installation Instructions FCA810/811 Height Adjustment 1. Loosen hardware used to attach main bracket (B) to upright bracket (A). (See Figure 26) 2. Adjust shelf height as desired. (See Figure 26) 2. (Single Screw option) Install 1/4-20 x 3/8” Phillips pan machine screw (Q) through mounting slot on shelf and into hole on bottom of camera. (See Figure 27) 3.
FCA810/811 Installation Instructions USA/International Europe Chief, a products division of Milestone AV Technologies 8800-002581 Rev00 2014 Milestone AV Technologies www.chiefmfg.com 05/14 Asia Pacific A P F A P F A 6436 City West Parkway, Eden Prairie, MN 55344 800.582.6480 / 952.225.6000 877.894.6918 / 952.894.6918 Franklinstraat 14, 6003 DK Weert, Netherlands +31 (0) 495 580 852 +31 (0) 495 580 845 Office No.