INSTALLATION INSTRUCTIONS Above Cart/Ceiling Above Wall (FCA801 shown) Below Cart/Ceiling Below Wall Fusion™ Large Above/Below Accessory Shelf Spanish Product Description German Product Description Portuguese Product Description Italian Product Description Dutch Product Description French Product Description FCA800/801
FCA800/801 Installation Instructions DISCLAIMER Milestone AV Technologies and its affiliated corporations and subsidiaries (collectively “Milestone”), intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use of this product.
Installation Instructions FCA800/801 DIMENSIONS - FCA800 FUSION WALL BELOW MOUNT SETUP 19.7 499.9 OVERALL MIN 12.9-15.2 [327.7-386.1] MIN RANGE 26.0 661.2 OVERALL MAX 15.2-17.7 [386.1-449.6] INTERMEDIATE RANGE 17.7-19.2 8.0 203.2 (*)NOTES: • TYPICAL FUSION INTERFACES ARE 0.625" [15.9] DEEP FUSION WALL ABOVE MOUNT SETUP 8.0 203.2 17.6-19.1 24.7 627.7 OVERALL MAX 18.4 466.4 OVERALL MIN 15.1-17.6 [383.5-447.0] INTERMEDIATE 12.7-15.1 RANGE [322.6-383.
FCA800/801 Installation Instructions DIMENSIONS - FCA800 (CONTINUED) FUSION CEILING/CART BELOW MOUNT SETUP 17.6 446.5 OVERALL MIN 12.4-14.3 [315.0-363.2] 14.3-16.8 MIN RANGE [363.2-426.7] INTERMEDIATE RANGE 24.6 624.3 OVERALL MAX 16.8-19.4 (*)NOTES: 14.0 355.6 • • • TYPICAL SINGLE DISPLAY MODELS HAVE INTERFACE DEPTHS .5" [12.7] TYPICAL DUAL DISPLAY MODELS HAVE INTERFACE DEPTHS 1.9" [48.3] FCA623 DUAL MONITOR INTERFACES ARE 1.4" DEEP [35.6] FUSION CEILING/CART ABOVE MOUNT SETUP 8.0 203.2 16.
Installation Instructions FCA800/801 DIMENSIONS - FCA801 FUSION WALL BELOW MOUNT SETUP 19.7 499.9 OVERALL MIN 12.9-15.2 [327.7-386.1] MIN RANGE 26.0 661.2 OVERALL MAX 15.2-17.7 [386.1-449.6] INTERMEDIATE RANGE 17.7-19.2 14.0 355.6 (*)NOTES: • TYPICAL FUSION INTERFACES ARE 0.625" [15.9] DEEP FUSION WALL ABOVE MOUNT SETUP 14.0 355.6 17.6-19.1 24.7 627.7 OVERALL MAX 15.1-17.6 [383.5-447.0] INTERMEDIATE 12.7-15.1 RANGE [322.6-383.5] MIN RANGE (*)NOTES: • TYPICAL FUSION INTERFACES ARE 0.
FCA800/801 Installation Instructions DIMENSIONS - FCA801 (CONTINUED) FUSION CEILING/CART BELOW MOUNT SETUP 17.6 446.5 OVERALL MIN 12.4-14.3 [315.0-363.2] 14.3-16.8 MIN RANGE [363.2-426.7] INTERMEDIATE RANGE 24.6 624.3 OVERALL MAX 16.8-19.4 (*)NOTES: 14.0 355.6 • • • TYPICAL SINGLE DISPLAY MODELS HAVE INTERFACE DEPTHS .5" [12.7] TYPICAL DUAL DISPLAY MODELS HAVE INTERFACE DEPTHS 1.9" [48.3] FCA623 DUAL MONITOR INTERFACES ARE 1.4" DEEP [35.6] FUSION CEILING/CART ABOVE MOUNT SETUP 14.0 355.6 16.
Installation Instructions FCA800/801 LEGEND Tighten Fastener Phillips Screwdriver Apretar elemento de fijación Destornillador Phillips Befestigungsteil festziehen Kreuzschlitzschraubendreher Apertar fixador Chave de fendas Phillips Serrare il fissaggio Cacciavite a stella Bevestiging vastdraaien Kruiskopschroevendraaier Serrez les fixations Tournevis à pointe cruciforme Loosen Fastener Open-Ended Wrench Aflojar elemento de fijación Llave de boca Befestigungsteil lösen Gabelschlüssel De
FCA800/801 Installation Instructions ASSEMBLY AND INSTALLATION (Below Cart/Ceiling) Below Installation (FCA801 shown) NOTE: FCA800 and FCA801 shelves may be installed above or below displays. To install above display, proceed to “Above Installation” Section. 2 (A) (L) x 2 Assembling Shelf to Upright Bracket 1. Attach shelf (E) to shelf support (D) using two #10-24 x 3/4” Phillips flat head machine screws (K).
Installation Instructions 3. 4. FCA800/801 Slide second shelf bracket (C) underneath lower rail on wall mount, lining up holes on shelf bracket (C) to main bracket (B). (See Figure 5) Use two 1/4-20 x 1/4” button head cap screws (M) and two large washers (H) to secure shelf bracket (C) to main bracket (B). (See Figure 5) (Below wall - maximum) (FCA800 shown) (J) (B) (Below wall) (V) wall mount rails 5 6 (H) x 2 (P) (G) x 2 (A) 4 (M) x 2 3 Figure 6 7.
FCA800/801 Installation Instructions Attaching Shelf to Cart/Ceiling Mount Installing to FCA623 Accessory IMPORTANT ! : If installing to a 2x1 display cart using the FCA623 accessory, proceed to “Installing to FCA623 Accessory” Section (Step 6). IMPORTANT ! : Steps 6-10 only apply if installing to FCA623 accessory. 1. Use two 1/4-20 x 1/4” button head cap screws (M) and two large washers (H) to secure shelf bracket (C) to main bracket (B). (See Figure 8) 2.
Installation Instructions FCA800/801 NOTE: Refer to Table 2 and dimension drawings on pages 36 to determine the extension level based on extension distance from mount center. Table 2: Below Cart/Ceiling Mount Extension distance from center of mount (in.) 13. (For minimum extension) Slide upright bracket behind main bracket. (See Figure 13) 14. (For minimum extension) Use 1/4-20 x 5/8” hex head flange bolt (N) and center washer (F) to secure upright bracket (A) to main bracket (B).
FCA800/801 Installation Instructions Above Installation Attaching Shelf to Wall Mount Assembling Shelf to Upright Bracket 1. 1. Install two 1/4-20 x 1/2” button head cap screws (L) into lowest holes on upright bracket (A). (See Figure 14) or (See Figure 15) 2. Hang shelf (E) onto two screws installed in Step 1. (See Figure 14) or (See Figure 15) 3. Secure upright bracket (A) to shelf (E) using: • • 4.
Installation Instructions FCA800/801 NOTE: Refer to Table 3 and dimension drawings on pages 36 to determine the extension level based on extension distance from mount center. Table 3: Above Wall Mount Attaching Shelf to Cart/Ceiling Mount IMPORTANT ! : If installing to a 2x1 display cart using the FCA623 accessory, proceed to “Installing to FCA623 Accessory” Section (Step 6). 1. Use two 1/4-20 x 1/4” button head cap screws (M) and two large washers (H) to secure shelf bracket (C) to main bracket (B).
FCA800/801 Installation Instructions NOTE: Refer to Table 4 and dimension drawings on pages 3- Installing to FCA623 Accessory 6 to determine the extension level based on extension distance from mount center. NOTE: Steps 6-10 only apply if installing to FCA623 accessory. 6. 7. Use two 1/4-20 x 7/16” button head cap screws (R), two large washers (H) and two 1/2” spacers (U) to secure shelf bracket (C) to main bracket (B).
Installation Instructions FCA800/801 Height Adjustment 1. Loosen hardware used to attach main bracket (B) to upright bracket (A). (See Figure 26) 2. Adjust shelf height as desired. (See Figure 26) 2. (Single Screw option) Install 1/4-20 x 3/8” Phillips pan machine screw (Q) through mounting slot on shelf and into hole on bottom of camera. (See Figure 27) 3.
FCA800/801 Installation Instructions USA/International Europe Chief, a products division of Milestone AV Technologies 8800-002652 Rev00 2015 Milestone AV Technologies www.chiefmfg.com 02/15 Asia Pacific A P F A P F A 6436 City West Parkway, Eden Prairie, MN 55344 800.582.6480 / 952.225.6000 877.894.6918 / 952.894.6918 Franklinstraat 14, 6003 DK Weert, Netherlands +31 (0) 495 580 852 +31 (0) 495 580 845 Office No.