Specifications

Installation Instructions DGI-42 and DGI-50

Install Rear Panel Assembly

Install the rear panel assembly as follows:

1. Engage the shoulder screws on the Front Interior

Mount into the slots on the Rear Exterior Mount

(see Figure 8).

2. Verify that Rear Exterior Mount is seated.

Secure Exterior Mount

Secure exterior mount as follows:

1. Insert 10-32 x ½ inch bolts through the two holes

on either side of the Rear Panel Assembly (C) into

the flanges on the Exterior Mount Assembly (see

Figure 9).

2. Tighten the bolts.

Figure 8. Install Rear Panel Assembly

Figure 9. Secure Exterior Mount

Rear Exterior

Mount (A)

Front Exte

rior

Mount (B)

Slot

Shoulder screw

Insert bolt through the

Rear Panel Assembly

Rear Panel interior (C)

#10-32 x ½ bolt (1 of 2)