Specifications

Installation Instructions DGI-42 and DGI-50
7
Fan Location
To use the Display Guard in portrait mode, do the
following:
1. Remove two fans and filters and reposition as shown
in Figure 5. Ensure that the louvers and airflow
direction are as shown in Figure 6.
NOTE: The fans operate on 120 VAC, with a
maximum capacity of 104 CFM per fan.
2. For preventative maintenance, do the following:
a. Clean the filters at an interval appropriate to the
surrounding environmental conditions. Clogged
or dirty filters can cause overheating.
b. Remove the filter covers with a flat blade
screwdriver. Be sure to reinstall with the louver
openings facing down.
Figure 5. Fan Location
Figure 6. Louvers and Air Flow Direction
Fans on bottom
Display Guard in
landscape mode
Fan detail
Air flow direction
Exhaust
Intake