Specifications

Installation Instructions DGI-42 and DGI-50
2
IMPORTANT WARNINGS and CAUTIONS!
WARNING A WARNING alerts you to the possibility of serious injury or death if you do not
follow the instructions.
CAUTION A CAUTION alerts you to the possibility of damage or destruction of equipment if you
do not follow the corresponding instructions.
 WARNING Improper installation can result in serious personal injury! Make sure that the
structural members can support a redundant weight factor five times the total
weight of the equipment. If not, reinforce the structure before installing the
mount.
 WARNING If the Display Guard is not installed correctly, there is the potential for personal
injury or damage to the unit.
 WARNING The installer is responsible for verifying that the wall to which the Display
Guard will be anchored will safely support the combined load of all attached
components or other equipment.
 WARNING
Weight Specifications (see Table 2).
 WARNING Watch out for pinch points. Do not put your fingers between movable parts.
 WARNING Make sure the mount is correctly oriented.
 CAUTION
Check the unit for shipping damage before you begin the installation.
 CAUTION
Use only the bolts that are provided and do not over-tighten the bolts.
EXTERIOR DIMENSIONS
Table 1 and Figure 1 provide the exterior dimensions of the Display Guard.
Table 1. Exterior Dimensions
Description Enclosure Model
Exterior
dimensions
32” 42” 50” 65”
Height 27.63 31.94 36.94 44.38
Width 38.74 47.94 55.94 69.64
Depth 19.55 23.01 23.05 21.21
 Specifications are subject to change without notice
Figure 1. Exterior Dimensions of Display Guard
Depth
Height
Width